Results tagged #Pic12f675 in Circuits

The Slave Flash Trigger is switched on/off by pressing the push button. When switched on, one to three flickers of the indicator lamp signal...

This is a very practical device and I built it so that it is a module to my Dual Channel IR Remote Control. Because of that I ended up with ...

Those days when I come home at night and strait into the darkness are finally over. This is a very practical device and I built it so that i...

This post provides a simple method to interface any keypad (e-g 4x4 or 4x3 etc) with PIC12F675 microcontroller. The code for PIC12F675 is w...

The Heater Fan Controller built around PIC12F675 microcontroller. It reads the (10k) linear potentiometer and generates appropriately timed ...

Using a PIC12F675, up to 5 outputs can be switched sequentially using a standard Remote Control pulse input of between 1 to 2 ms. Although a...

The reader mechanism shown was purchased from All Electronics for $1.50. The unit provides the magnetic head on a spring mechanism along wit...

This device acts as a variable speed control for the heater blower in a car. It takes its power directly from the existing wiring and connec...

I found some similar circuits but aren't good enough for me. Some circuits measure the water's resistance to determine the level. That is da...

This device is built around a PIC12F675 (a dandy little part from Microchip). The number of cells (1 to 8) is programmed in using the one ...