FM reciever with classic TDA7000
#FM receiver
#TDA7000
#frequency regulation
#sound intensity
#varicap
#PC interface
#D/A converter
#radio frequency
#communication
Description: With the P1 we regulate the intensity of sound. With the P2 we regulate the frequency of reception. Optionally: If you want to check the frequency with your PC it will be supposed you make the following energies: You assemble and the circuit that is in the blue frame. You cut the driver dj'pla in point A, as it appears in the circuit and you connect points A,V. If you know some language of programming as C ++, PASCAL, VISUAL BASIC, DELPHI etc you can write a program which will send in the parallel door (378 I) of PC a number from 0 until 255 checking thus the tendency of expense of simple D/A of converter (that it is in blue frame) and consequently and frequency of radio via passage VARICAP. More: (As long as grows the number that sends in the parallel door, so much minimizes the frequency that receives the radio.) Stabilised tendency of catering: Vcc=9~12V. Frequency of reception: 88~108MHz. Consumption: 100mA.
Parts: R1=47K, R2=22K, R3=100K, R4=39K, R5=10, R6-r12=7,5K - Optionally, R13-r21=15K - Optionally, P1=10K Logarithmic potentiometer, P2=100K Linear potentiometer, C1=39pF Ceramic, C2=47pF Ceramic, C3=2,2nF Polyester, C4, c14=220nF Polyester, C5=22nF Polyester, C6=10nF Polyester, C7, c18=180pF Ceramic, C8=150pF Ceramic, C9=100nF Polyester, C10, c13=330pF Ceramic, C11=220pF Ceramic, C12, c16=3300pF Ceramic, C15, c17=1800pF Ceramic, C19, c21, c22=10mF/16V electrolytic, C20=10nF Polyester, C23=47nF Polyester, C24, c25=470mF/16V electrolytic, L1, l2=5 Coils linked with internal diameter 4mm from cupreous isolated wire 0,6mm., IC1=TDA7000 with base DIL18, IC2=LM7805, IC3=LM386 with base DIL 8, D1=BB329 or BB105 or other than old tuner televisions., SPEAKER=Loudspeaker 8W/1W., S1=Switch of catering., AERIAL=50cm isolated wire, CONNECTOR DB25=Fastener of 25 pin parallel door PC (LPT) -Optional.
The circuit described is a radio receiver that offers adjustable sound intensity and frequency reception capabilities. The component P1, a 10K logarithmic potentiometer, is utilized to regulate the audio output level, while P2, a 100K linear potentiometer, adjusts the frequency reception. The design allows for optional interfacing with a personal computer (PC) to monitor the frequency output through a parallel port (DB25 connector).
The core of the circuit employs the TDA7000 integrated circuit (IC1), which is specifically designed for FM radio applications, supporting frequencies within the 88-108 MHz range. The circuit operates with a stabilized power supply voltage (Vcc) ranging from 9V to 12V and consumes approximately 100mA of current, making it suitable for battery-operated or portable applications.
The frequency modulation is enhanced through the use of a varicap diode (D1), which allows for electronic tuning by varying the capacitance in response to the control signals sent from the PC. The circuit includes various passive components such as resistors (R1 to R21) and capacitors (C1 to C25), which are carefully selected to ensure proper filtering, stability, and performance of the receiver.
The output audio is amplified by the LM386 (IC3), which is a low-voltage audio amplifier, providing sufficient power for driving an 8W loudspeaker. The LM7805 (IC2) serves as a voltage regulator, ensuring that the circuit receives a consistent 5V supply for the logic components.
Coils L1 and L2 are constructed from copper wire and are critical for tuning and signal reception, while the aerial, a simple 50 cm length of isolated wire, acts as the receiving antenna. The optional resistors R6 to R12 and R13 to R21 can be included to fine-tune the circuit's performance based on specific requirements or conditions.
Overall, this circuit design provides a comprehensive solution for a basic FM radio receiver with adjustable sound and frequency control, along with the potential for advanced interfacing with computer systems for enhanced functionality.With the P1 we regulate the intensity of sound. With the P2 we regulate the frequency of reception. Optionally: If you want to check the frequency with your PC it will be supposed you make the following energies: You assemble and the circuit that is in the blue frame. You cut the driver dj'pla in point A, as it appears in the circuit and you connect points A,V. If you know some language of programming as C ++, PASCAL, VISUAL BASIC, DELPHI etc you can write a program which will send in the parallel door (378 I) of PC a number from 0 until 255 checking thus the tendency of expense of simple D/A of converter (that it is in blue frame) and consequently and frequency of radio via passage VARICAP.
(As long as grows the number that sends in the parallel door, so much minimizes the frequency that receives the radio.) Stabilised tendency of catering: Vcc=9~12V. Frequency of reception: 88~108MHz. Consumption: 100mA. Parts: R1=47K, R2=22K, R3=100K, R4=39K, R5=10, R6-r12=7,5K - Optionally, R13-r21=15K - Optionally, P1=10K Logarithmic potentiometer, P2=100K Linear potentiometer, C1=39pF Ceramic, C2=47pF Ceramic, C3=2,2nF Polyester, C4, c14=220nF Polyester, C5=22nF Polyester, C6=10nF Polyester, C7, c18=180pF Ceramic, C8=150pF Ceramic, C9=100nF Polyester, C10, c13=330pF Ceramic, C11=220pF Ceramic, C12, c16=3300pF Ceramic, C15, c17=1800pF Ceramic, C19, c21, c22=10mF/16V electrolytic, C20=10nF Polyester, C23=47nF Polyester, C24, c25=470mF/16V electrolytic, L1, l2=5 Coils linked with internal diameter 4mm from cupreous isolated wire 0,6mm., IC1=TDA7000 with base DIL18, IC2=LM7805, IC3=LM386 with base DIL 8, D1=BB329 or BB105 or other than old tuner televisions., SPEAKER=Loudspeaker 8W/1W., S1=Switch of catering., AERIAL=50cm isolated wire, CONNECTOR DB25=Fastener of 25 pin parallel door PC (LPT) -Optional.
Parts: R1=47K, R2=22K, R3=100K, R4=39K, R5=10, R6-r12=7,5K - Optionally, R13-r21=15K - Optionally, P1=10K Logarithmic potentiometer, P2=100K Linear potentiometer, C1=39pF Ceramic, C2=47pF Ceramic, C3=2,2nF Polyester, C4, c14=220nF Polyester, C5=22nF Polyester, C6=10nF Polyester, C7, c18=180pF Ceramic, C8=150pF Ceramic, C9=100nF Polyester, C10, c13=330pF Ceramic, C11=220pF Ceramic, C12, c16=3300pF Ceramic, C15, c17=1800pF Ceramic, C19, c21, c22=10mF/16V electrolytic, C20=10nF Polyester, C23=47nF Polyester, C24, c25=470mF/16V electrolytic, L1, l2=5 Coils linked with internal diameter 4mm from cupreous isolated wire 0,6mm., IC1=TDA7000 with base DIL18, IC2=LM7805, IC3=LM386 with base DIL 8, D1=BB329 or BB105 or other than old tuner televisions., SPEAKER=Loudspeaker 8W/1W., S1=Switch of catering., AERIAL=50cm isolated wire, CONNECTOR DB25=Fastener of 25 pin parallel door PC (LPT) -Optional.
The circuit described is a radio receiver that offers adjustable sound intensity and frequency reception capabilities. The component P1, a 10K logarithmic potentiometer, is utilized to regulate the audio output level, while P2, a 100K linear potentiometer, adjusts the frequency reception. The design allows for optional interfacing with a personal computer (PC) to monitor the frequency output through a parallel port (DB25 connector).
The core of the circuit employs the TDA7000 integrated circuit (IC1), which is specifically designed for FM radio applications, supporting frequencies within the 88-108 MHz range. The circuit operates with a stabilized power supply voltage (Vcc) ranging from 9V to 12V and consumes approximately 100mA of current, making it suitable for battery-operated or portable applications.
The frequency modulation is enhanced through the use of a varicap diode (D1), which allows for electronic tuning by varying the capacitance in response to the control signals sent from the PC. The circuit includes various passive components such as resistors (R1 to R21) and capacitors (C1 to C25), which are carefully selected to ensure proper filtering, stability, and performance of the receiver.
The output audio is amplified by the LM386 (IC3), which is a low-voltage audio amplifier, providing sufficient power for driving an 8W loudspeaker. The LM7805 (IC2) serves as a voltage regulator, ensuring that the circuit receives a consistent 5V supply for the logic components.
Coils L1 and L2 are constructed from copper wire and are critical for tuning and signal reception, while the aerial, a simple 50 cm length of isolated wire, acts as the receiving antenna. The optional resistors R6 to R12 and R13 to R21 can be included to fine-tune the circuit's performance based on specific requirements or conditions.
Overall, this circuit design provides a comprehensive solution for a basic FM radio receiver with adjustable sound and frequency control, along with the potential for advanced interfacing with computer systems for enhanced functionality.With the P1 we regulate the intensity of sound. With the P2 we regulate the frequency of reception. Optionally: If you want to check the frequency with your PC it will be supposed you make the following energies: You assemble and the circuit that is in the blue frame. You cut the driver dj'pla in point A, as it appears in the circuit and you connect points A,V. If you know some language of programming as C ++, PASCAL, VISUAL BASIC, DELPHI etc you can write a program which will send in the parallel door (378 I) of PC a number from 0 until 255 checking thus the tendency of expense of simple D/A of converter (that it is in blue frame) and consequently and frequency of radio via passage VARICAP.
(As long as grows the number that sends in the parallel door, so much minimizes the frequency that receives the radio.) Stabilised tendency of catering: Vcc=9~12V. Frequency of reception: 88~108MHz. Consumption: 100mA. Parts: R1=47K, R2=22K, R3=100K, R4=39K, R5=10, R6-r12=7,5K - Optionally, R13-r21=15K - Optionally, P1=10K Logarithmic potentiometer, P2=100K Linear potentiometer, C1=39pF Ceramic, C2=47pF Ceramic, C3=2,2nF Polyester, C4, c14=220nF Polyester, C5=22nF Polyester, C6=10nF Polyester, C7, c18=180pF Ceramic, C8=150pF Ceramic, C9=100nF Polyester, C10, c13=330pF Ceramic, C11=220pF Ceramic, C12, c16=3300pF Ceramic, C15, c17=1800pF Ceramic, C19, c21, c22=10mF/16V electrolytic, C20=10nF Polyester, C23=47nF Polyester, C24, c25=470mF/16V electrolytic, L1, l2=5 Coils linked with internal diameter 4mm from cupreous isolated wire 0,6mm., IC1=TDA7000 with base DIL18, IC2=LM7805, IC3=LM386 with base DIL 8, D1=BB329 or BB105 or other than old tuner televisions., SPEAKER=Loudspeaker 8W/1W., S1=Switch of catering., AERIAL=50cm isolated wire, CONNECTOR DB25=Fastener of 25 pin parallel door PC (LPT) -Optional.
universal serial PC interface
Every hobbyist eventually considers ideas for controlling or measuring something with a PC. The allure of this concept is strong, especially with the abundance of easy-to-learn programming languages available today, enabling almost anyone to write software for tasks such as...
Mini FM Receiver Circuit
Several integrated circuits (ICs) are currently available that provide a nearly complete FM receiver solution. This project outlines a complete FM receiver circuit that offers excellent receiving and sound qualities. However, from a DIY enthusiast's perspective, the only drawback of...
FM CB radio receiver circuit design using TCA440
A simple FM CB radio receiver can be constructed using the electronic diagram provided. This FM CB radio receiver circuit utilizes a TCA440 integrated circuit and operates at an intermediate frequency of 455 kHz. The input filter is a 27MF...
FM Receiver
An FM regenerative receiver using a single FET and one audio amplifier IC.
The described circuit is an FM regenerative receiver, which is designed to demodulate frequency modulated signals. The core component of this receiver is a Field Effect Transistor (FET),...
Help me fix the noise in a FM receiver with AC/DC rectifier
The circuit described is an FM receiver. When a 9V power supply is used, the circuit exhibits good performance. However, performance issues arise when an AC/DC rectifier or switch-mode power supply is utilized.
The FM receiver circuit operates by demodulating frequency-modulated...
remote control for electrical
A circuit for a remote control unit utilizes radio frequency signals to operate various electrical appliances. This remote control unit features four channels, which can be expanded to twelve. Unlike typical remote control circuits that rely on infrared light for...
simple and powerful F.M. Receiver
Communication in the FM band is straightforward. This circuit diagram illustrates a powerful FM receiver utilizing a single integrated circuit (IC) that receives frequencies from 88 MHz to 108 MHz within the FM band.
The FM receiver circuit described operates within...
The basic structure of the DA conversion circuit multiplexer
A multi-channel D/A converter circuit is presented, illustrating its fundamental structure. This circuit effectively converts encoded digital signals into multiplexed analog signal outputs.
The multi-channel Digital-to-Analog (D/A) converter circuit is designed to facilitate the conversion of digital signals into corresponding analog...
One Transistor FM Receiver circuit diagram
This is a very simple FM receiver built using only one transistor. It does not utilize any chips or other active components. The output is connected to earphones; an amplifier circuit is required if the radio is to be heard...