Ultrasonic atomizer 2
#ultrasonic
#atomizer
#power supply
#timer
#transistor
#voltage regulator
#water detection
#alarm
#bridge rectifier
#control circuit
Description: The ultrasonic atomizer circuit consists of a power supply circuit, control circuit, water detection alarm circuit, and an ultrasonic oscillator, as illustrated in Figure 3-190. The power supply circuit includes a power switch (S), fuses (FU1, FU2), a timer (Q), a power transformer (T), a bridge rectifier (UR), resistors (R1, R2), and transistors (V1), along with a voltage regulator.
The ultrasonic atomizer circuit is designed to convert liquid into a fine mist using ultrasonic waves. The power supply circuit is critical for delivering the necessary voltage and current to the various components. The circuit begins with a power switch (S), which controls the entire system's operation. When activated, the current flows through the fuses (FU1, FU2) that protect the circuit from overloads or short circuits.
The timer (Q) is used to manage the operation time of the atomizer, ensuring that it operates only for a specified duration to prevent overheating or overuse. The power transformer (T) steps down the mains voltage to a lower level suitable for the circuit's components. Following this, the bridge rectifier (UR) converts the alternating current (AC) output from the transformer into direct current (DC), which is essential for the operation of the electronic components.
Resistors (R1, R2) are employed to limit the current and set the appropriate voltage levels for the transistors (V1), which act as switches, controlling the flow of current to the ultrasonic oscillator. The oscillator generates high-frequency signals that drive the ultrasonic transducer, creating ultrasonic waves that agitate the liquid, resulting in atomization.
Additionally, the water detection alarm circuit plays a crucial role in ensuring that the atomizer operates only when there is sufficient liquid present. This circuit typically uses a sensor that detects the water level and sends a signal to the control circuit to activate or deactivate the atomizer as needed.
Overall, the ultrasonic atomizer circuit is a well-integrated system that combines power management, control logic, and safety features to efficiently convert liquid into mist for various applications, including humidification and aroma diffusion.The ultrasonic atomizer circuit is composed of the power supply circuit, control circuit, water detection alarm circuit and ultrasonic oscillator, and the cirucuit is shown in Figure 3-190. Power supply circuit is composed of the power switch S, fuses FUl, FU2, timer Q, power transformer T, bridge rectifier UR, resistors Rl, R2, transistors Vl, voltage regul..
The ultrasonic atomizer circuit is designed to convert liquid into a fine mist using ultrasonic waves. The power supply circuit is critical for delivering the necessary voltage and current to the various components. The circuit begins with a power switch (S), which controls the entire system's operation. When activated, the current flows through the fuses (FU1, FU2) that protect the circuit from overloads or short circuits.
The timer (Q) is used to manage the operation time of the atomizer, ensuring that it operates only for a specified duration to prevent overheating or overuse. The power transformer (T) steps down the mains voltage to a lower level suitable for the circuit's components. Following this, the bridge rectifier (UR) converts the alternating current (AC) output from the transformer into direct current (DC), which is essential for the operation of the electronic components.
Resistors (R1, R2) are employed to limit the current and set the appropriate voltage levels for the transistors (V1), which act as switches, controlling the flow of current to the ultrasonic oscillator. The oscillator generates high-frequency signals that drive the ultrasonic transducer, creating ultrasonic waves that agitate the liquid, resulting in atomization.
Additionally, the water detection alarm circuit plays a crucial role in ensuring that the atomizer operates only when there is sufficient liquid present. This circuit typically uses a sensor that detects the water level and sends a signal to the control circuit to activate or deactivate the atomizer as needed.
Overall, the ultrasonic atomizer circuit is a well-integrated system that combines power management, control logic, and safety features to efficiently convert liquid into mist for various applications, including humidification and aroma diffusion.The ultrasonic atomizer circuit is composed of the power supply circuit, control circuit, water detection alarm circuit and ultrasonic oscillator, and the cirucuit is shown in Figure 3-190. Power supply circuit is composed of the power switch S, fuses FUl, FU2, timer Q, power transformer T, bridge rectifier UR, resistors Rl, R2, transistors Vl, voltage regul..
10 Amp 13.8 Volt Power Supply
Sometimes amateurs like to home-brew their power supplies instead of purchasing one off the shelf at any of the major ham radio retail dealers. The advantage to rolling your own power supply is that it teaches us how they work...
The counter
The circuit of this device is relatively straightforward. An input circuit filters the signal from the antenna to minimize sensitivity to other phenomena and protect against overvoltages. Four transistors create a "one-shot" section that is activated by the input circuit,...
Cumulative timer circuit diagram
The cumulative timer circuit comprises resistor R1 and an internal crystal oscillator, represented in a chart. Resistors R1 and R2 are metal film types, while resistors R3 to R5 are rated at 1/8W and also of the metal film variety....
T3SE type 3 SE
The all-transistor T3SE operates similarly to a conventional switch mode power supply (SE). Like the Tritium model, it activates when the charging current falls below a specified threshold. After the circuit is triggered, positive feedback is utilized to latch the...
TRANSISTORIZED THYRATRON RING COUNTER
Each bistable circuit comprises two oppositely-symmetrical germanium transistors, two diodes, and four resistors. An additional transistor, Q, facilitates the transition of the conducting state to the next position when actuated by a transfer pulse. The absence of capacitors allows for...
A Tan TimerCircuit
Six timing positions suited to different skin types; timing affected by sunlight intensity. This timer was designed for individuals seeking to achieve a tan.
The electronic timer circuit described is intended for use in tanning applications, specifically designed to cater to...
headlights timer
This device is a simple timer that keeps the headlights of a vehicle illuminated for approximately 1 minute and 30 seconds. This feature is particularly useful when accessing dark areas, eliminating the need to return to manually switch off the...
Power disconnection alarm circuit diagram
The circuit operation principle of the device illustrated in Figure 13 is as follows: When the barbed wire (Fe) remains intact, the output pin (O) of the LSE is at a high state. Consequently, the transistor (VT) remains off, and...
Ultrasonic remote control switch lighting circuit
The T-40-16 and 555 ultrasonic transmitter circuit configuration consists of an ultrasonic transmitter T-40-16 and a 555 timer circuit. By adjusting the potentiometer RP, the oscillation frequency of the circuit can be changed. The output pulse frequency from the 555...