Two-stage frequency divider
#frequency divider
#digital circuit
#flip-flop
#counter
#clock signal
#binary division
#logic gates
#sequential logic
No description available.
Logic Circuits Vs Transistor Power Circuits
Invert a signal to drive FETs with rapid rise and fall times. It was suggested to use an inverter (not a chip) instead of logic chips, which are designed to be either fully ON or OFF. The individual has prior...
4040B LED Counter
The number of pulses at the input can be visually confirmed by connecting a light-emitting diode to the output of the counter.
In this circuit, a counter is utilized to count the number of input pulses. The output of the counter...
Frequency Divider with 7490 circuit
This document presents an intriguing collection of frequency dividers with division factors ranging from 2 to 10. All options are based on the 7490, which is a decade and binary counter.
The frequency dividers utilizing the 7490 integrated circuit (IC) provide...
Frequency Divider
This is a classic divider of frequency via two. It is achieved with a classic circuit T-flipFlop, round IC1 [4011]. In the circuit, the frequency of network, after are limit the negative half-s period of sine wave and transform in...
Counter circuit diagram of the digital circuit
The digital counter circuit described utilizes an infrared signal to detect moving targets, making it suitable for counting small devices on a production line as they move along a conveyor belt. This circuit can also be employed for various other...
Electronic potentiometer circuit composed of digital circuits
Figure 4-14 illustrates a digital integrated circuit featuring 16 preset potentiometers for Siniperca electronic circuits. The circuit comprises three main components: an input controller, a presettable counter, an analog electronic switch, and a resistor network. It includes a push-button switch...
Flip-Flop Independent Lamp Driver
Assume first that SCR1 is on and SCR2 is off, allowing capacitor CI to be fully charged, with its LMP2 end positive. The state of the circuit can be altered by pressing switch S2. When SCR2 turns on, it capacitively...
digital counter circuit
The Digital Counter Circuit is an electronic project that converts digital numbers (0-9) to binary (0-1). For those interested in understanding binary code, a PowerPoint presentation on the topic is available. Below are the parts list, schematic, and additional information...
1 Kw flip-flop flasher circuit
This application involves a static switch circuit where the control logic is implemented using a flip-flop, which is driven by a unijunction transistor. The flashing rate of the circuit can be adjusted, ranging from approximately 0.1 seconds to a 10-second...