Quick NiCd - NiMH Charger
Description: The charger is built around a LM317 adjustable regulator. The charge starts when a battery is connected between pins JP1-JP4 or JP2-JP4 or JP3-JP4. For example, if a battery is connected to JP1-JP4 pins then the current that flows causes a voltage drop to R1, then D1 causes a voltage drop of 0.7 volts and Q1 conducts. Then through the transistor's emitter flows a current that comes from the Adjustment pin of LM317. Diode D4 prevents current from flowing from the battery back to the charging circuit. Resistors R1, R2, and R3 adjust the charging current and its value is given from: Rx=(1.25 + 0.1) / I, where x = 1,2,3. More: I is 1/10 of the battery's charging capacity. For example, if the battery has a rated capacity of 1700mA then I = 170.
The input voltage must be at least 3 times the battery's voltage. For example, an input voltage of 25V can charge an 8.4V (9V) battery.
R3 is 1/2 Watt and R1 and R2 are 1/4 Watt.
The circuit utilizes the LM317 voltage regulator, which is a versatile component capable of providing a stable output voltage. The LM317 operates in the adjustable mode, allowing it to regulate the output voltage based on the resistors R1 and R2, which are configured in a voltage divider arrangement. The adjustment pin of the LM317 is crucial for setting the output voltage, which in turn determines the charging current supplied to the connected battery.
When a battery is connected to any of the designated pins (JP1-JP4, JP2-JP4, or JP3-JP4), the charging process initiates. The current flowing through R1 creates a voltage drop, which is essential for the operation of the subsequent components in the circuit. The diode D1, with a forward voltage drop of approximately 0.7 volts, allows current to pass while blocking reverse current flow, ensuring that the battery does not discharge back into the circuit. The transistor Q1 acts as a switch controlled by the output from the LM317, allowing current to flow to the battery when it is charging.
Resistors R1, R2, and R3 play a critical role in determining the charging current. The formula provided, Rx=(1.25 + 0.1) / I, highlights how the resistance values can be calculated based on the desired charging current, which is set to 1/10 of the battery's capacity. This method ensures that the charging current is appropriate for the battery being charged, preventing overcharging or damage.
The design specifies that the input voltage must be at least three times the voltage of the battery to ensure proper operation of the LM317. For instance, a battery with a nominal voltage of 8.4 volts would require a minimum input voltage of 25.2 volts for effective charging.
Power ratings for the resistors are also specified, with R3 rated at 1/2 Watt and R1 and R2 at 1/4 Watt, ensuring that they can handle the power dissipation without overheating during operation. This attention to component ratings is essential for the reliability and longevity of the charging circuit.The charger is build around a LM317 (click to download datasheet) adjustable regulator. The charge starts when a battery is connected between pins JP1-JP4 or JP2-JP4 or JP3-JP4. For example, if a battery is connected to JP1-JP4 pins then the current that flows cause a voltage drop to R1, then D1 causes a voltage drop of 0,7 volts and ?1 conducts. Then through transistor's emitter flows a current that comes from Adjustment pin of LM317. Diode D4 prevents current to flow from battery back to the charging circuit. Resistors R1,R2 and R3 adjusts the charging current and it's value is given from : Rx=(1,25 + 0,1) / I , where x = 1,2,3.
I is 1/10 of the battery's charging capacity. For example if battery has a rated capacity of 1700mA then ?=170. The input voltage must be at least 3 times the battery's voltage. For example an input voltage of 25V can charge a 8,4V (9V) battery. R3 is 1/2 Watt and R1 and R2 it's 1/4 Watt.
The input voltage must be at least 3 times the battery's voltage. For example, an input voltage of 25V can charge an 8.4V (9V) battery.
R3 is 1/2 Watt and R1 and R2 are 1/4 Watt.
The circuit utilizes the LM317 voltage regulator, which is a versatile component capable of providing a stable output voltage. The LM317 operates in the adjustable mode, allowing it to regulate the output voltage based on the resistors R1 and R2, which are configured in a voltage divider arrangement. The adjustment pin of the LM317 is crucial for setting the output voltage, which in turn determines the charging current supplied to the connected battery.
When a battery is connected to any of the designated pins (JP1-JP4, JP2-JP4, or JP3-JP4), the charging process initiates. The current flowing through R1 creates a voltage drop, which is essential for the operation of the subsequent components in the circuit. The diode D1, with a forward voltage drop of approximately 0.7 volts, allows current to pass while blocking reverse current flow, ensuring that the battery does not discharge back into the circuit. The transistor Q1 acts as a switch controlled by the output from the LM317, allowing current to flow to the battery when it is charging.
Resistors R1, R2, and R3 play a critical role in determining the charging current. The formula provided, Rx=(1.25 + 0.1) / I, highlights how the resistance values can be calculated based on the desired charging current, which is set to 1/10 of the battery's capacity. This method ensures that the charging current is appropriate for the battery being charged, preventing overcharging or damage.
The design specifies that the input voltage must be at least three times the voltage of the battery to ensure proper operation of the LM317. For instance, a battery with a nominal voltage of 8.4 volts would require a minimum input voltage of 25.2 volts for effective charging.
Power ratings for the resistors are also specified, with R3 rated at 1/2 Watt and R1 and R2 at 1/4 Watt, ensuring that they can handle the power dissipation without overheating during operation. This attention to component ratings is essential for the reliability and longevity of the charging circuit.The charger is build around a LM317 (click to download datasheet) adjustable regulator. The charge starts when a battery is connected between pins JP1-JP4 or JP2-JP4 or JP3-JP4. For example, if a battery is connected to JP1-JP4 pins then the current that flows cause a voltage drop to R1, then D1 causes a voltage drop of 0,7 volts and ?1 conducts. Then through transistor's emitter flows a current that comes from Adjustment pin of LM317. Diode D4 prevents current to flow from battery back to the charging circuit. Resistors R1,R2 and R3 adjusts the charging current and it's value is given from : Rx=(1,25 + 0,1) / I , where x = 1,2,3.
I is 1/10 of the battery's charging capacity. For example if battery has a rated capacity of 1700mA then ?=170. The input voltage must be at least 3 times the battery's voltage. For example an input voltage of 25V can charge a 8,4V (9V) battery. R3 is 1/2 Watt and R1 and R2 it's 1/4 Watt.
transistor timer
A single transistor timer circuit tutorial designed for beginners in electronics. This is an easy electronic circuit that can be constructed on a breadboard.
The single transistor timer circuit utilizes a transistor as the primary switching element to create a delay...
2 Transistor LED Flasher
This is a classic 2-transistor astable multivibrator. Many other NPN small signal or switching transistors can be used, including 2N4401, PN2222, or 2N2222 using the circuit on the left. The circuit can also be inverted using PNP transistors such as...
Stable Filament Power Supply Circuit
The circuit diagram illustrates a voltage regulator designed from discrete components to meet specific voltage requirements. It provides two sets of component values for output voltages of 6.3 V (upper) and 12.6 V (lower). The components used include BC547 and...
simple common emitter amplifier
The biasing calculations for collector feedback common emitter amplifiers had not been previously addressed, particularly for a simple one-transistor NPN preamplifier built by Dino. Confusion arose regarding the role of resistor R1 in the schematic, which appeared to serve only...
A five inverter circuit
A self-excited transistor inverter circuit is designed for improved performance and features a relatively simple schematic. It is suitable for driving fluorescent lamps with a power rating between 8 to 40 watts. This inverter can operate stably even when the...
Touch-on-off-electronic-switch
Transistors Q1 and Q2 control latches Q3 and Q4 to switch on the lamp. A high resistance from touching the electrode biases Q1 or Q2 on, setting or resetting the latch.
In this circuit, transistors Q1 and Q2 function as input...
Noise making circuits
The core of the circuit is a two-transistor flasher with frequency modulation applied to the base of the first transistor. When the pushbutton is pressed, the oscillation frequency increases to a peak, and upon release, the frequency decreases due to...
Adjustable 3 Ampere Regulator
By combining a standard 78L05 voltage regulator with an integrated audio amplifier, specifically the TDA2030, it is possible to construct a simple yet effective adjustable voltage regulator. This regulator can output a voltage adjustable up to 20 V and handle...
lm317 variable power supply circuit project
The circuit diagram of this LM317 power supply electronic project requires a few external components. The input voltage for this project must be between 8 and 35 volts, providing a variable output voltage ranging from 1.8 volts to 32 volts....