Two-tone-siren
Description: This siren provides a constant audio output while alternating between two distinct tones. The LM13080 is configured to oscillate at a fundamental frequency. This frequency can be modified by connecting a 200 kΩ charging resistor in parallel with the feedback resistor, R2.
The circuit operates using the LM13080, a versatile tone generator IC that is capable of producing audio tones through its internal oscillator. The fundamental frequency of the oscillation is determined by the values of the resistors and capacitors connected to the IC. In this configuration, a 200 kΩ resistor is added in parallel with the feedback resistor, R2, which influences the timing characteristics of the oscillator circuit.
The alternating tones generated by the siren can be achieved by modulating the output frequency. This modulation can be accomplished by adjusting the value of the feedback resistor, which affects the charge and discharge cycles of the timing capacitor. The result is a siren that alternates between two distinct audio frequencies, creating an effective alerting sound that can be used in various applications such as alarms, warning systems, and signaling devices.
To design the circuit, the following components are essential: the LM13080 IC, a timing capacitor (C1), the feedback resistor (R2), and the additional 200 kΩ charging resistor. The values of these components should be carefully selected to achieve the desired frequency range and tone alternation. The output can be connected to a speaker or buzzer that is capable of producing the audible tones at the specified frequencies.
In summary, the siren circuit utilizing the LM13080 IC is a practical solution for generating alternating tones, with the ability to adjust the frequency through resistor configuration, making it suitable for a variety of signaling applications.This siren provides a constant audio output, but alternates between two separate tones. The LM13080 is set to oscillate at one basic frequency; this frequency is changed by adding a 200-K!l charging resistor in parallel with the feedback resistor, R2.
The circuit operates using the LM13080, a versatile tone generator IC that is capable of producing audio tones through its internal oscillator. The fundamental frequency of the oscillation is determined by the values of the resistors and capacitors connected to the IC. In this configuration, a 200 kΩ resistor is added in parallel with the feedback resistor, R2, which influences the timing characteristics of the oscillator circuit.
The alternating tones generated by the siren can be achieved by modulating the output frequency. This modulation can be accomplished by adjusting the value of the feedback resistor, which affects the charge and discharge cycles of the timing capacitor. The result is a siren that alternates between two distinct audio frequencies, creating an effective alerting sound that can be used in various applications such as alarms, warning systems, and signaling devices.
To design the circuit, the following components are essential: the LM13080 IC, a timing capacitor (C1), the feedback resistor (R2), and the additional 200 kΩ charging resistor. The values of these components should be carefully selected to achieve the desired frequency range and tone alternation. The output can be connected to a speaker or buzzer that is capable of producing the audible tones at the specified frequencies.
In summary, the siren circuit utilizing the LM13080 IC is a practical solution for generating alternating tones, with the ability to adjust the frequency through resistor configuration, making it suitable for a variety of signaling applications.This siren provides a constant audio output, but alternates between two separate tones. The LM13080 is set to oscillate at one basic frequency; this frequency is changed by adding a 200-K!l charging resistor in parallel with the feedback resistor, R2.
Multitone Siren circuit
This multi-tone siren is beneficial for burglar alarms, reverse horns, and similar applications. It generates five distinct audio tones, making it more attention-grabbing than a single-tone siren. The circuit is designed around the widely used CMOS oscillator and divider IC...
Double oscillator metal detector
The circuit consists of two oscillators, both working at about 465 kHz. One uses an if transformer and the other uses an inductor (the search coil LI). The oscillators are coupled by a capacitor (10 pF). A beat note (produced...
Simple lock circuit can alarm
The circuit operates as illustrated in Figure 5-2a. It includes an alarm switch (S). When switch S is pressed, relay K is activated, which closes two normally open contacts. This action triggers the alarm bells. The alarm continues to sound...
Electronic Organ Circuit
This electronic organ circuit is straightforward to construct and primarily consists of an emitter-coupled oscillator formed by transistors T2 and T3. A square wave voltage can be obtained from the collector of T3 (X2), which imparts a clarinet-like quality to...
wonky wire
The Wonky Wire circuit is based on the same oscillator used for the Flashing LED Lights. The timing components (R1/C1 and R4/C2) are significantly smaller, resulting in a higher oscillation frequency of approximately 3 kHz (3000 cycles per second). A...
Metal detector circuit diagram 5
The metal detector circuit comprises an oscillator and a sound-light alarm circuit. The oscillator circuit includes an inductor (L), a capacitor (C1), a sensor switch integrated circuit (IC1) that integrates the oscillator, detector, comparator circuit, and peripheral components. The sound-light...
The door bell circuit
Figure 1 illustrates an economical and straightforward Gate Alarm designed to operate using a small universal AC-DC power supply. IC1a functions as a fast oscillator, while IC1b serves as a slow oscillator. These two oscillators are integrated through IC1c to...
Mini Alarms
This is a selection of small self-contained alarm circuits. They have a very low standby current; and are suitable for battery operation.
The described alarm circuits are compact and designed for low power consumption, making them ideal for battery-powered applications. These...
Siren circuit
With this circuit we can create a altered sound of siren. The oscillator IC1a-b is constituted by two gates NAND, oscillating in very low frequency. This oscillation drive the IC2, that is a electronic switch, which opens and closes in...