wireless video audio signal sender
#wireless transmission
#video signal
#audio signal
#RF module
#transmitter
#receiver
#signal processing
#communication
#broadcast
No description available.
A8V W8EXI 6CL6 One Tube Transmitter
A8V W8EXI 6CL6 One Tube Transmitter. The operation of the 6CL6 transmitter is actually quite sophisticated.
The A8V W8EXI 6CL6 One Tube Transmitter is a compact and efficient radio frequency (RF) transmitter that utilizes a single 6CL6 vacuum tube for its...
Tuned Radio Frequency (TRF) Receiver
Superheterodyne receivers have been mass-produced since around 1924, but for reasons of cost did not become successful until the 1930s.
Superheterodyne receivers represent a pivotal advancement in radio technology, characterized by their ability to convert high-frequency signals into lower intermediate...
Transmitter Negative Key Line Keyer
Using an NTE288 (or ECG288, GE223, or SK3434), this circuit can key a negative line up to -300 V maximum. Do not use this circuit to key a vacuum-tube amplifier that draws grid current because the keying transistor might be...
472 kHz Transmitter
The exciter board is based on an Arduino WSPR exciter. Plans are underway to create a more advanced stand-alone board using inexpensive Chinese DDS modules available from eBay. Currently, a DDS60 by AmQRP is being utilized. The output from this...
tx atv
This project was developed in collaboration with several other operators, particularly Marco IW1DGG, within a local radio club. The initial goal was to create a simple transmitter capable of providing sufficient power to excite the local ATV repeater. However, suitable...
receiver architectures
Various architectures of receivers have been proposed in literature, but the most popular architectures among them, such as Heterodyne, Homodyne, Wideband-IF, and Low-IF, are presented here.
The Heterodyne receiver architecture utilizes two frequencies: the incoming radio frequency (RF) signal and a...
TV as display terminal interface circuit diagram
The interface circuit is placed between the computer's standard video signal output terminal and the television. It amplifies the standard 1V (Peak-to-Peak) video signal to 3V (Peak-to-Peak). The negative feedback circuit consists of transistors T1 and T2, providing a wide...
The AA8V/W8EXI 6CL6 One-Tube Transmitter
The operation of the 6CL6 transmitter is quite sophisticated despite the simple appearance of the circuit. The core of the circuit is the electron-coupled crystal oscillator. This circuit integrates the functions of an oscillator and amplifier into a single tube,...
valved transmitter for 3.5 MHz
This transmitter project is a highly efficient, rugged, and simple low-power continuous wave (C.W.) unit delivering more than 10W. It is crystal-controlled with stabilized high tension (H.T.) and features a buffer stage between the crystal oscillator and power amplifier stages,...