Ultra Low Drop Linear Voltage Regulator
#linear regulator
#low dropout
#MOSFET
#IRF540
#voltage doubler
#12V output
#power supply
#transformer
#circuit design
#electronics
Description: This circuit is a MOSFET-based linear voltage regulator with a voltage drop as low as 60 mV at 1 A. It utilizes a 15V-0-15V transformer and an IRF540 N-channel MOSFET (Q1) to provide a regulated 12V output. The gate drive voltage necessary for the MOSFET is generated using a voltage doubler circuit composed of diodes D1 and D2, along with capacitors C1 and C2. To fully turn on the MOSFET, the gate terminal must be approximately 10V above the source terminal, which is connected to the DC output. The voltage doubler supplies this voltage to the gate through resistor R3. An adjustable shunt regulator, TL431 (IC2), is employed as the error amplifier, dynamically adjusting the gate voltage to maintain output regulation. With an appropriate heatsink for the MOSFET, the circuit can deliver up to 3A output with a slightly elevated minimum voltage drop. Trimpot VR1 allows for fine adjustment of the output voltage. The RC network formed by R5 and C6 provides compensation for the error amplifier. Additionally, the circuit includes short-circuit crowbar protection to prevent damage from accidental output shorts. Under normal operation, the voltage across capacitor C5 is 6.3V, keeping diode D5 reverse-biased by the 12V output. In the event of a short-circuit, the output voltage drops momentarily, causing D5 to conduct, which triggers the MOC3021 Triac optocoupler (IC1) to pull the gate voltage to ground and limit the output current. This state remains latched until the input voltage is turned off to reset the circuit.
This MOSFET-based linear voltage regulator circuit is designed for efficient voltage regulation with minimal voltage drop and high output current capability. The use of an IRF540 N-channel MOSFET allows for robust performance, handling up to 3A output current when adequately heatsinked. The transformer provides the necessary AC voltage, which is rectified and smoothed by the voltage doubler circuit, ensuring that the gate drive voltage for the MOSFET is sufficiently elevated for optimal operation.
The TL431 serves as a precision voltage reference and error amplifier, ensuring that the output voltage remains stable despite variations in load conditions. The feedback loop, facilitated by the voltage doubler and resistor R3, allows for real-time adjustments to the gate voltage, maintaining the desired output voltage of 12V. The inclusion of a trimpot (VR1) allows for precise calibration of the output voltage, accommodating any variations in component values or desired output specifications.
The compensation network composed of resistor R5 and capacitor C6 ensures stability in the feedback loop, preventing oscillations that could compromise the performance of the regulator. Furthermore, the crowbar protection mechanism is crucial for safeguarding the circuit against short-circuit conditions. By using the MOC3021 Triac optocoupler, the circuit can effectively disconnect the gate drive from the MOSFET in the event of an overload, preventing damage to the components and ensuring safe operation.
Overall, this circuit exemplifies a well-designed linear voltage regulator that combines efficiency, stability, and protection features, making it suitable for a variety of applications requiring reliable voltage regulation.This circuit is a Mosfet-based linear voltage regulator with a voltage drop of as low as 60mV at 1A. The circuit uses a 15V-0-15V transformer and employs an IRF540 N-channel Mosfet (Q1) to deliver the regulated 12V output. The gate drive voltage required for the Mosfet is generated using a voltage doubler circuit consisting of diodes D1 & D2 and c
apacitors C1 & C2. To turn the Mosfet fully on, the gate terminal should be around 10V above the source terminal which is connected to the DC output. The voltage doubler feeds this voltage to the gate via resistor R3. IC2, a TL431 adjustable shunt regulator, is used as the error amplifier. It dynamically adjusts the gate voltage to maintain the regulation at the output. With an adequate heatsink for the Mosfet, the circuit can provide up to 3A output at slightly elevated minimum voltage drop.
Trimpot VR1 is used for fine adjustment of the output voltage. The RC network consisting of R5 and C6 provides error-amplifier compensation. The circuit is provided with short-circuit crowbar protection to guard against an accidental short at the output. This crowbar protection works as follows: under normal working conditions, the voltage across capacitor C5 will be 6.
3V and diode D5 will be reverse-biased by the output voltage of 12V. However, during output short-circuit conditions, the output will momentarily drop, causing D5 to conduct. This triggers the MOC3021 Triac optocoupler (IC1) which in turn pulls the gate voltage to ground. This limits the output current. The circuit will remain latched in this state and the input voltage has to be switched off to reset the circuit.
This MOSFET-based linear voltage regulator circuit is designed for efficient voltage regulation with minimal voltage drop and high output current capability. The use of an IRF540 N-channel MOSFET allows for robust performance, handling up to 3A output current when adequately heatsinked. The transformer provides the necessary AC voltage, which is rectified and smoothed by the voltage doubler circuit, ensuring that the gate drive voltage for the MOSFET is sufficiently elevated for optimal operation.
The TL431 serves as a precision voltage reference and error amplifier, ensuring that the output voltage remains stable despite variations in load conditions. The feedback loop, facilitated by the voltage doubler and resistor R3, allows for real-time adjustments to the gate voltage, maintaining the desired output voltage of 12V. The inclusion of a trimpot (VR1) allows for precise calibration of the output voltage, accommodating any variations in component values or desired output specifications.
The compensation network composed of resistor R5 and capacitor C6 ensures stability in the feedback loop, preventing oscillations that could compromise the performance of the regulator. Furthermore, the crowbar protection mechanism is crucial for safeguarding the circuit against short-circuit conditions. By using the MOC3021 Triac optocoupler, the circuit can effectively disconnect the gate drive from the MOSFET in the event of an overload, preventing damage to the components and ensuring safe operation.
Overall, this circuit exemplifies a well-designed linear voltage regulator that combines efficiency, stability, and protection features, making it suitable for a variety of applications requiring reliable voltage regulation.This circuit is a Mosfet-based linear voltage regulator with a voltage drop of as low as 60mV at 1A. The circuit uses a 15V-0-15V transformer and employs an IRF540 N-channel Mosfet (Q1) to deliver the regulated 12V output. The gate drive voltage required for the Mosfet is generated using a voltage doubler circuit consisting of diodes D1 & D2 and c
apacitors C1 & C2. To turn the Mosfet fully on, the gate terminal should be around 10V above the source terminal which is connected to the DC output. The voltage doubler feeds this voltage to the gate via resistor R3. IC2, a TL431 adjustable shunt regulator, is used as the error amplifier. It dynamically adjusts the gate voltage to maintain the regulation at the output. With an adequate heatsink for the Mosfet, the circuit can provide up to 3A output at slightly elevated minimum voltage drop.
Trimpot VR1 is used for fine adjustment of the output voltage. The RC network consisting of R5 and C6 provides error-amplifier compensation. The circuit is provided with short-circuit crowbar protection to guard against an accidental short at the output. This crowbar protection works as follows: under normal working conditions, the voltage across capacitor C5 will be 6.
3V and diode D5 will be reverse-biased by the output voltage of 12V. However, during output short-circuit conditions, the output will momentarily drop, causing D5 to conduct. This triggers the MOC3021 Triac optocoupler (IC1) which in turn pulls the gate voltage to ground. This limits the output current. The circuit will remain latched in this state and the input voltage has to be switched off to reset the circuit.
12V voltage doubler circuit
The schematic diagram originates from a 12V DC voltage doubler circuit power supply. This circuit diagram illustrates a DC voltage doubler/DC converter that transforms a 12V DC power supply into 24V DC and 18V DC outputs. It is compatible with...
Line-operated-amplifier
T1 isolates the unit from the line and has a 24-V, center-tapped secondary. The output of the transformer is rectified by diodes D1 and D2 and filtered by capacitor C3 to provide 15 to 18 Vdc. The LM383 has built-in...
Full Bridge Inverter with MOSFET and IR2110 gate driver
Assistance is required for a final year project involving the design of a grid-connected inverter. The focus is on developing a full bridge inverter circuit.
The grid-connected inverter is a crucial component in renewable energy systems, particularly in solar photovoltaic (PV)...
LOW DROPOUT THREE TERMINAL REGULATORS
After the battery is connected, the movement of the touch stick activates the light source, which illuminates the photosensitive tube and generates a light current. This triggers the first level 3DG6 to turn on, allowing the emitter to output a...
Transistor Tutorial MOSFETs
The Metal-Oxide-Semiconductor Field-Effect Transistor (MOSFET) is analogous to the Junction Field-Effect Transistor (JFET) in several aspects. Both types are voltage-driven unipolar devices that rely on either electron or hole movement, but not both, unlike bipolar transistors. A key structural distinction...
Power MOSFET Bridge Rectifier
The losses in a bridge rectifier can become significant when rectifying low voltages. The voltage drop across the bridge is approximately 1.5 V, which constitutes about 25% loss with an input voltage of 6V. This loss can be reduced by...
mosfet low dropout charger circuit
This circuit is designed as a low dropout charger using a MOSFET as the pass element; however, it does not incorporate current limiting. The circuit diagram illustrates a straightforward design. It utilizes Q3 and a Schottky diode to isolate the...
transformer Low voltage oscillator for joule thief
A transformer with two input leads and three output leads was used. An LED was connected to two of the output leads, and when a dead AA battery was connected to the input leads, the LED blinked for a brief...
An automatic voltage regulator circuit
A step-down transformer converts AC 220V to a lower voltage. A diode bridge rectifier and filter capacitor provide a direct current (DC) output, which fluctuates with variations in the grid voltage. A resistive voltage divider is used for sampling. When...