0-60sec start-stop timer with 555
#555 timer
#relay
#start-stop timer
#adjustable timer
#time interval
#delay circuit
#mini timer
#universal timer
#output relay
Description: This timer is ideal for small applications. Due to its simple structure, its usage and nevertheless its universal character, this mini timer is usable in the most current applications needing time intervals, from some seconds through approximately 60 minutes. By simple modifications it is possible to adjust the maximum time and the timing scale, as necessary. A strong output, made by a relay, permits to adapt, on the input and the output, whatever apparatus. More: The circuit is constructed around the classical timer NE555. Parts: R1=1K R2=10K R3=4K7 R4=1K R5=10K R6=4K7 R7=1K RV=2M2 D1=1N914 C1=100nF C2=100uF/16V IC1=NE555 T1=BC547 RY=12V RELAY
The described timer circuit utilizes the NE555 timer IC, which is a versatile and widely used component in various timing applications. The circuit is designed to generate adjustable time intervals ranging from a few seconds up to approximately 60 minutes, making it suitable for a wide range of applications.
The component values specified in the circuit are as follows:
- R1 (1KΩ), R2 (10KΩ), R3 (4.7KΩ), R4 (1KΩ), R5 (10KΩ), R6 (4.7KΩ), R7 (1KΩ) are resistors that help set the timing intervals.
- RV (2.2MΩ) is a variable resistor that allows for fine-tuning of the timing duration.
- D1 (1N914) is a diode used for protection against reverse polarity and to control the discharge path of the timing capacitor.
- C1 (100nF) is a timing capacitor that, in conjunction with the resistors, determines the charge and discharge time, thereby controlling the duration of the timer.
- C2 (100µF/16V) serves as a filter capacitor to stabilize the power supply for the circuit.
- IC1 is the NE555 timer IC itself, configured in either astable or monostable mode depending on the desired operation.
- T1 (BC547) is a transistor used to amplify the output signal from the NE555 timer to drive the relay.
- RY is a 12V relay that acts as the output switch, allowing the circuit to control larger loads with the timer's output.
This circuit can be easily modified by changing the resistor and capacitor values to adjust the timing range and scale according to specific requirements. The relay output enables the timer to control various devices, making it a flexible solution for applications requiring timed operations.This timer is ideal for small aplications. Due to its simple structure, its usage and nevertheless its universal character, this mini timer is usable in the most current applications needing time intervals, from some seconds through approximately 60 minutes. By simple modifications it is possible to adjust the maximum time and the timing scale, as necessary.
A strong output, made by a relay, permits to adapt, on the input and the output, whatever apparatus.
The described timer circuit utilizes the NE555 timer IC, which is a versatile and widely used component in various timing applications. The circuit is designed to generate adjustable time intervals ranging from a few seconds up to approximately 60 minutes, making it suitable for a wide range of applications.
The component values specified in the circuit are as follows:
- R1 (1KΩ), R2 (10KΩ), R3 (4.7KΩ), R4 (1KΩ), R5 (10KΩ), R6 (4.7KΩ), R7 (1KΩ) are resistors that help set the timing intervals.
- RV (2.2MΩ) is a variable resistor that allows for fine-tuning of the timing duration.
- D1 (1N914) is a diode used for protection against reverse polarity and to control the discharge path of the timing capacitor.
- C1 (100nF) is a timing capacitor that, in conjunction with the resistors, determines the charge and discharge time, thereby controlling the duration of the timer.
- C2 (100µF/16V) serves as a filter capacitor to stabilize the power supply for the circuit.
- IC1 is the NE555 timer IC itself, configured in either astable or monostable mode depending on the desired operation.
- T1 (BC547) is a transistor used to amplify the output signal from the NE555 timer to drive the relay.
- RY is a 12V relay that acts as the output switch, allowing the circuit to control larger loads with the timer's output.
This circuit can be easily modified by changing the resistor and capacitor values to adjust the timing range and scale according to specific requirements. The relay output enables the timer to control various devices, making it a flexible solution for applications requiring timed operations.This timer is ideal for small aplications. Due to its simple structure, its usage and nevertheless its universal character, this mini timer is usable in the most current applications needing time intervals, from some seconds through approximately 60 minutes. By simple modifications it is possible to adjust the maximum time and the timing scale, as necessary.
A strong output, made by a relay, permits to adapt, on the input and the output, whatever apparatus.
The circuit is constructed around the classical timer NE555. Parts: R1=1K R2=10K R3=4K7 R4=1K R5=10K R6=4K7 R7=1K RV=2M2 D1=1N914 C1=100nF C2=100uF/16V IC1=NE555 T1=BC547 RY=12V RELAY
Ultrasonic transmitter circuit 555
The circuit described is a 555 ultrasonic transmitter constructed to emit ultrasonic signals at a frequency of 40 kHz. It operates by generating oscillating pulse outputs from a 555 timer (specifically the T-40-16 model). The circuit is designed to function...
JB-22 transistor relay circuit
When the input is disconnected, the transistor VTi conducts, while VTz is in cutoff, causing relay KA to release. When the input is shorted, VTi is cut off, VTz conducts, and relay KA is activated.
In this circuit configuration, the operation...
Delay circuit diagram of energy-saving lamps
The delay-saving lamp circuit functions as a sound and light control delay energy-saving lighting system. It can directly replace a standard light switch without modifying the existing lighting circuits. In bright or daytime conditions, the sound control feature ensures that...
Economy Timer 555 IC
This circuit detects when a window is open (it can also be used with a door), indicates that the window is open by means of a red LED or a blinking LED, and emits a loud acoustic signal from an...
Linear frequency meter
The 555 timer is utilized in a monostable multivibrator circuit that generates a pulse of fixed time width, which is activated by an unknown input frequency.
The 555 timer in a monostable configuration operates by producing a single output pulse in...
relay Do I need a protection diode here
An automotive relay is being analyzed, which exhibits a more complex wiring configuration than typical relays. The diagram indicates that the B/G line maintains a high signal if certain conditions are met, specifically when the engine temperature is excessively high,...
The function generator composed of 555 timer
The chart illustrates a function generator circuit utilizing a 555 timer. This circuit includes a CH7555 timer along with several transistors and RC components. It is capable of generating triangle waves, square waves, sine waves, sawtooth waves, and square wave...
low power simple energy efficient circuit to make single IR LED blink
The circuit involves powering an LED using a 3V CR2032 battery, with the intention of extending battery life by making the LED blink rather than remain continuously on. A 555 timer is considered, utilizing large value resistors in the voltage...
Intermittent start-stop cycle control circuit of seven b
The circuit, as illustrated in Figure 3-82, employs a 555 IC to control a motor automatically, managing its start and stop cycles. The running and stopping times of the motor can be adjusted by modifying the values of potentiometers RPi...