PLL SINGLE TONE DECODER
#PLL
#tone decoder
#Touch-Tone
#telephone-line
#wireless control
#audio frequency
#low-pass filter
#frequency calculation
Description: This circuit can be utilized for Touch-Tone decoding as well as for telephone line and wireless control applications using a single audio frequency. The operating center frequency is determined by components H1 and C1. The resistor R1 should be within the range of 2K to 20K. The capacitance C1, expressed in microfarads, is calculated using the formula f = 1/R1C1, where R is in megohms and f is in hertz. The capacitor C2 functions as a low-pass filter with a range of 1-22 µF; a larger value results in a narrower bandwidth. The capacitor C3 is not critical and may be approximately twice the value of C2. Reference: C. D. Rakes, "Integrated Circuit Projects," Howard W. Sams, Indianapolis, IN, 1975, pp. 68-73.
This circuit design is intended for applications involving Touch-Tone decoding and control of telephone lines or wireless systems, employing audio frequencies for operation. The selection of components is crucial for achieving the desired performance.
The center frequency of the circuit is primarily influenced by the values of the components H1 (which may refer to an inductor or other frequency-determining element) and C1 (a capacitor). The resistor R1 plays a significant role in defining the time constant of the circuit, with its resistance value required to be set between 2KΩ and 20KΩ. This range allows for flexibility in tuning the circuit’s response characteristics.
The capacitance C1 is calculated based on the relationship f = 1/R1C1, which indicates that the frequency (f) is inversely proportional to the product of the resistance (R1) and the capacitance (C1). This formula enables the designer to determine the appropriate capacitance value needed to achieve the desired frequency of operation, with C1 expressed in microfarads.
Additionally, C2 serves as a low-pass filter, which is essential for removing high-frequency noise from the signal. The value of C2 can be selected from a range of 1µF to 22µF; increasing the capacitance will result in a narrower bandwidth, thus enhancing the filtering capability of the circuit. This aspect is particularly important in applications where signal clarity is paramount.
C3, while not critical to the circuit’s operation, should be approximately twice the value of C2. This component may be used for additional stability or filtering, but its specific value can be adjusted based on the overall design requirements and performance objectives.
In summary, this circuit is designed for efficient audio frequency signal processing and control applications. The careful selection of resistors and capacitors, as outlined, ensures optimal performance in Touch-Tone decoding and related functionalities.Can be used for Touch-Tone decoding as well as for telephone-line and wireless control applications using single audio frequency. Operating center frequency depends on H1 and C1. R1 should be between 2K and 20K. C1 in microfarads is computed from f = 1/R1C1, where R is in megohms and f is in hertz. C2 is low-pass filter in range of 1-22 F; the la rger its value, the narrower its bandwidth. C3 is not critical and can be about twice C2. -C. D. Rakes, "Integrated Circuit Projects, " Howard W. Sams, Indianapolis, IN, 1975, p 68-73.
This circuit design is intended for applications involving Touch-Tone decoding and control of telephone lines or wireless systems, employing audio frequencies for operation. The selection of components is crucial for achieving the desired performance.
The center frequency of the circuit is primarily influenced by the values of the components H1 (which may refer to an inductor or other frequency-determining element) and C1 (a capacitor). The resistor R1 plays a significant role in defining the time constant of the circuit, with its resistance value required to be set between 2KΩ and 20KΩ. This range allows for flexibility in tuning the circuit’s response characteristics.
The capacitance C1 is calculated based on the relationship f = 1/R1C1, which indicates that the frequency (f) is inversely proportional to the product of the resistance (R1) and the capacitance (C1). This formula enables the designer to determine the appropriate capacitance value needed to achieve the desired frequency of operation, with C1 expressed in microfarads.
Additionally, C2 serves as a low-pass filter, which is essential for removing high-frequency noise from the signal. The value of C2 can be selected from a range of 1µF to 22µF; increasing the capacitance will result in a narrower bandwidth, thus enhancing the filtering capability of the circuit. This aspect is particularly important in applications where signal clarity is paramount.
C3, while not critical to the circuit’s operation, should be approximately twice the value of C2. This component may be used for additional stability or filtering, but its specific value can be adjusted based on the overall design requirements and performance objectives.
In summary, this circuit is designed for efficient audio frequency signal processing and control applications. The careful selection of resistors and capacitors, as outlined, ensures optimal performance in Touch-Tone decoding and related functionalities.Can be used for Touch-Tone decoding as well as for telephone-line and wireless control applications using single audio frequency. Operating center frequency depends on H1 and C1. R1 should be between 2K and 20K. C1 in microfarads is computed from f = 1/R1C1, where R is in megohms and f is in hertz. C2 is low-pass filter in range of 1-22 F; the la rger its value, the narrower its bandwidth. C3 is not critical and can be about twice C2. -C. D. Rakes, "Integrated Circuit Projects, " Howard W. Sams, Indianapolis, IN, 1975, p 68-73.
PLL FM Detector using PLL IC 565
Phase Lock Loop (PLL) FM Detector with 565 PLL IC. The circuit diagram and internal structure of the PLL IC 565 are shown in the given figures.
The Phase Lock Loop (PLL) FM Detector utilizing the 565 PLL IC is an...
DC accurate low-pass filter
The LTC1050 is configured as unity gain 2nd order low-pass filter which center frequency is (1.2πR´C´) = 1.72 • fCUT-OFF = 17.2Hz and Q = 0.5. Figure 2 shows the amplitude response of the filter, and Figure 3 shows a...
CDCF5801 Low Jitter PLL Based Multiplier/Divider With Programmable Delay Lines Down To Sub 10ps
The CF5019 series are high-frequency, third overtone crystal oscillator module ICs. They integrate an oscillator circuit and an output buffer that function at high frequencies on a single chip. The oscillator circuit utilizes CMOS inverters and a built-in damping resistor...
Frequency signal tracking circuit (PLL circuit) composed of CD4046
A frequency signal tracking circuit is implemented using a phase-locked loop (PLL) configuration, which is a fundamental application of the CD4046 integrated circuit. The circuit, illustrated in the accompanying chart, utilizes the CD4046 to form a PLL that effectively captures...
PLL Oscillator for Medium Wave Frequency
A PLL oscillator, or phase-locked loop oscillator, is a control method that compares a controlled system or plant to a reference signal.
A phase-locked loop (PLL) oscillator is a sophisticated electronic circuit designed to synchronize an output signal's phase and frequency...
Using the MC145158 PLL Frequency Synthesizer
The Motorola MC145158 is a dual-modulus, serial-input PLL frequency synthesizer commonly utilized in older Motorola cellular phones. For detailed technical specifications, refer to the MC145158 datasheet. Although the MC145158 is no longer in production, it can occasionally be found in...
PLL Oscillator for Medium Wave Frequency
A PLL oscillator, or phase-locked loop oscillator, is a control method that compares a controlled system or plant to a reference signal.
A phase-locked loop (PLL) oscillator is a sophisticated electronic circuit designed to synchronize an output signal's phase and frequency...
PLL IR LASER LIGHT RECEIVER
Circuit schematics for the 555-based PLL laser light PFM receiver. Although R4 is shown as a resistor, it is advisable to replace it with a 10-kΩ precision potentiometer to allow for fine-tuning of the transmitter's center frequency. Experimentation with the...
PRUBY Documentation
The PRUBY module provides a phase-locked loop (PLL) interface for rubidium frequency references, specifically the LPRO-101 and FRS-C products from EFRATOM Ball, Inc. This module conditions the 10 MHz signal from the reference and offers both a square wave reference...