Results tagged #Riaa in Circuits

If your stereo amplifier does not have an input for a record player, you should use this circuit between your turntable and your amplifier. ...

If your stereo amplifier does not have an input for a record player, you should use this circuit between your turntable and your amplifier. ...

Even if a large number of album titles once available on vinyl are now, little by little, being proposed as CDs, not all are available and f...

To listen old vinyl LP`s in a correct sounding on a sassy with dynamic cartridge you need a circuit, named RIAA corrector. This circuit you ...

Even if a large number of album titles once available on vinyl are now, little by little, being proposed as CDs, not all are available and f...

The circuit essentially provides low-frequency boost below 318 Hz and high-frequency attenuation above 3150 Hz. ...

This circuit has read the RIAA equalization, tone controls, and adequate gain to drive most power amplifiers conunercial by using CA3410 op ...

If you still like to spin vinyl and features a turntable, but the amplifier has no more input for a turntable is below a switching solution....

In older amps is usually a phono input. Today, this used less and less, and it would be useful if the input and line input can be used. This...

Vinyl equalisation (EQ) has been with us in a stable and predictable form for quite a long time, but for those who are interested in the old...

I came up with this idea when I was in a situation where ... * I had an amplifier with an unused RIAA input and * I was missing ...

This riaa Pre-Amp is the perfect solution to getting a signal off of your old turntable and into your mixing board. Whether you want to grab...