Results tagged #Photocell in Circuits

By the photocell photoelectric tracking circuit configuration, with two similar performance as a photoelectric cell the same light receivin...

We can use the flash beam to supply the remote control for the AC power devices. The important point of this device is the memory function. ...

We can use the flash beam to supply the remote control for the AC power devices. The important point of this device is the memory function. ...

At this circuit you can give a variety of utilities, from an alarm, to open a door, turn on a light in the garden or courtyard, and so on. Y...

This is a Basic Cadmium Sulfide (Cds) Photocell Detector circuit. In this circuit, when the light falling on the photocell (PC 1) is blocked...

...

Provides remote control for ac-powered devices by using the beam of a flashlight as a magic wand. The important aspect of this gadget is tha...

One leg of the photocell (Rl) is tied to the +15 volt supply and the other end is connected to ground through resistor R2, forming a voltage...

A photocell circuit provides automatic threshold adjustment. Monostable action prevents undesired retriggering of the output. With only one ...

This circuit delivers either 4.8 or 7.2 V regulated at 15 mA with a 3-V input from a bank of photocells. R1 should be 453 k? for a 7.2-V out...

The output of the amplifier is to be measured on a digital voltmeter. Besides being able to accept 20 na to 200 micro amps and output voltag...

This photocell is best mounted at tie level between the rails. The variable resistor adjusts the sensitivity of the circuit. This circuit ca...

This photocell is best mounted at tie level between the rails. The variable resistor adjusts the sensitivity of the circuit. This circuit ca...