Results tagged #Lithium Ion in Circuits
2 Cell Lithium Ion Charger circuit
This circuit was build to charge a couple series Lithium cells (3.6 volts each, 1 Amp Hour capacity) installed in a portable transistor radi...
MAX8844 lithium ion charger electronic circuit design
Using the MAX8844 lithium ion charger IC released by Maxim Semiconductors you can design an very simple and efficiency charger circuit for c...
build lithium ion battery
The article now describes how to build a charger controller board and how to program the AVR microcontroller. You should have a LiIon batter...
lithium ion Battery management circuit for Nokia BL-4C / 5C Li-ION batteries
Nokia BL-4C / BL-5C are 3. 7V, 700-1000mAh ( variants ) Lithium-ion batteries, have 3 terminals, as explained here, for battery positive-ter...
Lithium Ion Charger 2 Cell
The charger operates by supplying a short current pulse through a series resistor and then monitoring the battery voltage to determine if an...
Lithium Ion charger circuit using LM3632
Lithium Ion charger circuit design electronic project using LM3632 controller....
Lithium Ion Lithium Poly Charger by LM317
The above circuit will charge any 2-cell * Li-Ion battery pack. Maximum current is about 650 milliamps. The circuit is designed for batterie...
3.6 Volt Lithium Ion Battery Charger (PIC12F675)
Lithium Ion batteries pack a lot of power by weight compared to other types. There are 2 things that need to be handled differently than ni...