Results tagged #Beeper in Circuits

24v DC is a very popular voltage used in industrial settings. The circuit below was designed to accept four different 24v DC alarm input sig...

...

This beeper circuit will generate an car-splitting 110dB from 9V. The setup uses a single 74C14 (CD40106B) CMOS hex inverting Schmitt-trigge...

Pushing on P1 resets IC2 that start oscillating at a frequency fixed by R3 & C1. With values shown, this frequency is around 4Hz. LED D2, dr...

Here is a schematic of a beeper circuit. The circuit will generate a continuous beep-beep sound signal with flashing an LED.....

This circuit is intended for alerting purposes after a certain time is elapsed. It is suitable for table games requiring a fixed time to ans...

...

For simplest functions (flashing indicator and/or beeper) you don`t need a printed circuit board, directly weld onto the legs of the PIC, an...

This circuit will generate an ear-splitting 110 dB from 9 V. The setup uses a single 74C14 (CD40106B) CMOS hex inverting Schmitt-trigger IC...

This box is a portable transfer standard to maintain and carry with you a local time signal of 59 short beeps (pips) plus a long 0.4 sec bee...

This box is a portable transfer standard to maintain and carry with you a local time signal of 59 short beeps (pips) plus a long 0.4 sec bee...