4-Channel Commutator Circuit
#JFET
#voltage translator
#DTL-TTL logic
#low leakage
#4-channel
#2N4091
#DM7800
#gate drive
#ON resistance
#OFF current
Description: This 4-channel commutator utilizes the 2N4091 to achieve a low channel ON resistance (approximately 30 ohms) and minimal OFF current leakage. The DM7800 voltage translator is a monolithic device that provides gate drive voltages ranging from 10V to 20V to the JFETs while ensuring DTL-TTL logic compatibility. A schematic drawing accompanies this description.
The 4-channel commutator circuit is designed to switch multiple signal paths effectively while maintaining low resistance and high reliability. The key component, the 2N4091 JFET, is chosen for its low ON resistance of approximately 30 ohms, which minimizes power loss and improves signal integrity. The low OFF current leakage characteristic of the 2N4091 ensures that when the channels are not active, they do not draw significant power, enhancing the overall efficiency of the circuit.
The DM7800 voltage translator plays a crucial role in the operation of the commutator by providing the necessary gate drive voltages. With an output voltage range of 10V to 20V, it can adequately drive the JFETs, ensuring that they switch on and off effectively. This capability allows the circuit to interface seamlessly with both DTL (Diode-Transistor Logic) and TTL (Transistor-Transistor Logic) logic families, making it versatile for various applications.
The schematic representation of the circuit typically includes the 2N4091 JFETs arranged in a manner that allows for the selection of different channels. Each channel's gate is connected to the output of the DM7800, which is controlled by the logic inputs from the DTL or TTL devices. The design may also include pull-down resistors to stabilize the gate voltages when the input signals are not active.
In summary, this 4-channel commutator circuit effectively combines the low ON resistance and low OFF leakage characteristics of the 2N4091 with the versatile voltage driving capabilities of the DM7800, resulting in a reliable and efficient solution for switching applications in digital circuits.This 4-channel commutator uses the 2N4091 to achieve low channel ON resistance (k30X) and low OFF current leakage. The DM7800 voltage translator is a monolithic device which provides from a10V to b20V gate drive to the JFETs while at the same time providing DTL-TTL logic compatability.
Here is a schematic drawing:
The 4-channel commutator circuit is designed to switch multiple signal paths effectively while maintaining low resistance and high reliability. The key component, the 2N4091 JFET, is chosen for its low ON resistance of approximately 30 ohms, which minimizes power loss and improves signal integrity. The low OFF current leakage characteristic of the 2N4091 ensures that when the channels are not active, they do not draw significant power, enhancing the overall efficiency of the circuit.
The DM7800 voltage translator plays a crucial role in the operation of the commutator by providing the necessary gate drive voltages. With an output voltage range of 10V to 20V, it can adequately drive the JFETs, ensuring that they switch on and off effectively. This capability allows the circuit to interface seamlessly with both DTL (Diode-Transistor Logic) and TTL (Transistor-Transistor Logic) logic families, making it versatile for various applications.
The schematic representation of the circuit typically includes the 2N4091 JFETs arranged in a manner that allows for the selection of different channels. Each channel's gate is connected to the output of the DM7800, which is controlled by the logic inputs from the DTL or TTL devices. The design may also include pull-down resistors to stabilize the gate voltages when the input signals are not active.
In summary, this 4-channel commutator circuit effectively combines the low ON resistance and low OFF leakage characteristics of the 2N4091 with the versatile voltage driving capabilities of the DM7800, resulting in a reliable and efficient solution for switching applications in digital circuits.This 4-channel commutator uses the 2N4091 to achieve low channel ON resistance (k30X) and low OFF current leakage. The DM7800 voltage translator is a monolithic device which provides from a10V to b20V gate drive to the JFETs while at the same time providing DTL-TTL logic compatability.
Here is a schematic drawing:
Jfet Wideband Amplifier
Using an MPF102 JFET, this circuit has a 50-ohm input impedance. The load impedance should be approximately 470 ohms. A 3:1 matching transformer can be utilized to return the impedance to 50 ohms. This circuit will exhibit a gain of...
CRYSTAL TESTER
The JFET Pierce oscillator is designed to test any crystal within a frequency range of 50 kHz to 25 MHz, accommodating the upper frequency limit of fundamental-mode crystals without the need for tuning. It is capable of driving a counter...
JFET iPod preamplifier
JFET iPod preamplifier, DIY Hi-Fi, schematic
The JFET iPod preamplifier circuit is designed to amplify the audio signal from an iPod or similar portable audio device, enabling it to drive higher impedance loads such as amplifiers or speakers. This circuit typically...
200 MHz Cascade Amplifier
The 200 MHz JFET possesses the following characteristics: 1. Low crossmodulation 2. High large-signal handling capability 3. No requirement for neutralization 4. Automatic Gain Control (AGC) managed by adjusting the biasing of the upper.
The 200 MHz Junction Field Effect Transistor...
Two-Stage JFET Preamp/Booster
This circuit functions as a clean preamplifier or booster pedal. It is specifically designed for clean amplification rather than overdrive, although it can be overdriven to produce soft clipping typical of JFETs. The circuit originated as a booster pedal concept...
JFET-Bipolar Cascode Circuit
A JFET-bipolar cascode circuit is designed to deliver complete video output for driving the cathode of a CRT. The configuration offers an approximate gain of 90. The cascode arrangement mitigates issues related to the Miller capacitance of the JFET 2N4091,...
JFET PREamp
The input transistor Q2 is an N-channel JFET. Each specific JFET establishes a particular output bias voltage, necessitating the selection of the JFET from various devices to achieve the desired bias value. Fortunately, due to the low current involved, suitable...
project armageddon processor
This circuit is a simple JFET input buffer that connects to a clean boost inspired by the Electro-Harmonix LPB-1 Linear Power Boost. The guitar input is buffered and then split into four input points, allowing connections to various other modules....
200Mhz cascode amplifier
This 200 MHz JFET cascode circuit features low cross-modulation, large signal handling ability, no neutralization, and automatic gain control (AGC) managed by biasing the upper cascode JFET. The only special requirement of this circuit is that the drain-source saturation current...