detecting liquified petroleum gas lpg
#LPG sensor
#gas detection
#safety
#alarm
#MQ-6 sensor
#gas leakage
#sensor circuit
#home safety
#industrial safety
#environmental monitoring
No description available.
Single Zone Alarm
A single zone alarm circuit with entry and exit delay and other facilities. The circuit features automatic exit and entry delays, timed bell cut-off and system reset. It has provision for normally open and normally closed switches and will suit...
Personal Alarm
This circuit, enclosed in a small plastic box, can be placed into a bag or handbag. A small magnet is placed close to the reed switch and connected to the hand or the clothes of the person carrying the bag...
Night Safety Light For Autos
This circuit activates the brake lights of a parked car when headlights from an approaching vehicle are detected, alerting the driver of the oncoming vehicle about the stationary car. LDR4 serves as the sensor, while LDR1 deactivates the circuit by...
Simple Multi-Tone Alarm Circuit
The figure illustrates the circuit diagram of a multi-tone alarm, which fundamentally operates as an amplifier circuit. The core component of this circuit is the dual.
The multi-tone alarm circuit is designed to produce various sound tones, enhancing its alerting capabilities....
Alarm Sounder For Flex Switch Circuit
This is a cross-sectional diagram of a flex switch. They can be used as pushbuttons or even position sensors. This schematic diagram shows an oscillator, which is used as an alarm sounder, triggered by a flex switch.
The flex switch is...
enhanced shed garage alarm
This is an improved version of the basic Garage/Shed Alarm. The Entry and Exit delays have been extended to approximately 30 seconds, and a timed siren cut-off along with an automatic reset feature has been incorporated. Additionally, the LED indicator...
Single Alarm Circuit
This is a single alarm circuit. The circuit includes automatic exit and entry delays, a timed bell cut-off, and a system reset. It has provisions for normally open and normally closed inputs.
The single alarm circuit is designed to provide security...
Menci alarm produced schematic circuit diagram
The alarm circuit operates as follows: When the power switch SW1 is turned on, the alarm system becomes active. If a magnet is brought close to the spring, the magnetic field attracts the spring, causing the dynamic and static switch...
Single-Ic Alarm
With a single integrated circuit (IC), it is possible to construct a straightforward and dependable auto burglar alarm or a similar alarm system. Refer to (a) for the timing information related to the alarm circuit in (b). When leaving the...