Slave Flash Trigger Circuit Schematic
#flash trigger
#slave flash
#photography
#lighting control
#remote trigger
#synchronization
#optical sensor
#circuit design
#DIY electronics
#photography gear
No description available.
Lighting auto controller
The following governor is designed to regulate the light intensity of a 220 V incandescent lamp. The circuit consists of relatively few components, allowing for easy assembly on a small circuit board. It is recommended to enclose the completed assembly...
Flash triggering circuit
My first project after assembling an electronic design lab was to build a flash trigger that I could use for high-speed photography. I thought it would be useful to share not only the finished product but also the reasoning that...
Stereo Digital Camera Power-up Pulse Generator
Powering up twin digital Sony DSC-V1 cameras simultaneously can achieve remarkable synchronization within milliseconds. This is accomplished through the use of dual Sony wired remotes that short the ACC port LANC signal conductor to the ACC port ground. Further experimentation...
Turntable Photography Equipment
The device captures 360-degree photos, which are essentially animations made from multiple images of a product taken from different angles. It requires a controllable device that can take pictures at even intervals. As depicted in the accompanying image, a device...
Optical Interruption Sensor
Using only an 8-pin integrated circuit (IC) and a few discrete components, an infrared optical interrupter can be constructed. The NE567 tone decoder includes all necessary circuit elements: a local oscillator, a phase-locked loop (PLL) decoder, and a 100-mA output...
Slave Flash Trigger
Using any camera in a dull or dark environment generally requires supplementary light. This is a standard technique, even when adequate natural lighting exists, to take conventional film pictures with enhanced contrast using a fill-in flash for foreground subjects in...
Fill light indoor photography circuit
Engaged in indoor portrait photography, practitioners often find that using a single camera can result in images lacking depth and layering. To achieve better photographic outcomes, multiple auxiliary lighting sources are typically arranged around the subject. The following describes a...
A contact-less digital tachometer based on optical sensors
The circuit for the Digital Tachometer/RPM Counter consists of only a few devices. Wire them up according to the following circuit diagram. The PIC used is on a demonstration board, which means the clock, power, and ground pins are already...
Slave Flash Trigger
Using any camera in a dull or dark environment generally requires supplementary light. This is a standard technique, and even where adequate natural lighting exists, conventional film pictures can benefit from enhanced contrast by using a fill-in flash for foreground...