0-10V control for RC servos
#RC servos
#0-10V control
#voltage control
#servo driver
#PWM control
#analog control
#hobby electronics
#remote systems
#control voltage
No description available.
PC Controlled Voltage or Current Source
This project was begun as a means to charge and cycle NiCad batteries but has become a versatile tool for experiments requiring either a controlled voltage up to +30V and/or a current of +/- 2.5 Amps. If all you want...
Voltage Controlled Switch
This is a small circuit designed for use as a charging controller or voltage limiter. It is particularly useful for creating a solar charger. The assembly of the circuit allows for modifications according to personal preferences. The circuit is intended...
Gas Generator Voltage Control Circuit
A power supply system utilizes a generator as a source of fuel to separate hydrogen and oxygen gases from natural water. It has the capability to control gas production by varying the amplitude of the voltage and/or the pulse repetition...
Inverse Voltage Controlled Voltage Source
This circuit enables a smaller control voltage to inversely and linearly control a larger output voltage (Vo). Additionally, the supply voltage (Vsp) for the operational amplifiers can be lower than the output voltage, allowing the circuit to theoretically control an...
Control Voltage Distributor
This project represents an older design that has likely been replaced by a newer version. Nevertheless, it remains a functional design and can be beneficial for homebrew synthesizer enthusiasts. It should be noted that the majority of these designs lack...
Power Switch/Dimmer
This line voltage power controller connects a DC control voltage or microprocessor logic output to an AC load. By adding a filter capacitor to the input resistors, the circuit can be controlled by a duty-cycle modulated square wave with approximately...