simple mini fm receiver
#FM receiver
#radio
#RF
#tuner
#broadcast
#receiver circuit
#frequency modulation
#simple circuit
#mini circuit
No description available.
Four channel RF remote control
This is a simple RF transmitter circuit utilizing the Holtek HT-12E encoder chip and an AM 418MHz transmitter module (WZ-X01). The use of hybrid RF transmit/receive modules simplifies the construction of the RF remote control. The transmitter can operate with...
Bandswitched Grid Dip Meter
This circuit is designed for checking resonances in tuned circuits, antennas, and similar applications, covering a frequency range of 2 to 20 MHz. Q1 acts as an oscillator that can be tuned across this range using capacitor C1 and band-switched...
SENSITIVE RF VOLTMETER
This schematic illustrates a peak-reading diode voltmeter that is powered by two amplification stages. A 100 µF capacitor is utilized to create a substantial time constant, which ensures effective damping of the meter. The restricted differential output voltage, combined with...
schematic of lenovo e317
Analog baseband digital circuit table of contents: EMI interface, BPI bus, JTAG, LCD interface, keypad, UART, MINT, GPIO, MCP keypad, audio, RF, I/O connector, power cones, serial time, battery charging and analog, LED driver, RF control, JTAG, IOTA, audio codecs,...
RF Field Strength Meter Circuit
A sensitive and reliable RF field strength meter is an invaluable instrument in amateur radio and radio-controlled model applications. This field strength meter is utilized to align antennas for optimal gain and to determine the transmission range of radio controllers....
RF Field Strength meter
As I used this probe last night to determine if a 384 MHz oscillator was really working or not, I remembered an email I received a while ago, asking how to make a field strength indicator without the microcontroller. Thus...
Sensitive RF Voltmeter Probe
Sensitive RF Voltmeter Probe Circuit. This circuit measures RF voltages beyond 200 MHz and up to about 5 V. PARTS LIST: R1 - 4.7 MΩ, R2 - 1 MΩ, R3 - 1 MΩ, R4 - 100 kΩ, R5 - 330...
Jammer circuit
The frequency jammer operates by generating interfering RF noise centered around a 2.45 GHz carrier frequency. As the power of this noise increases, the signal-to-noise ratio of the wireless communication channel decreases, leading to a higher bit error rate until...
2 channel RF remote control
The basic small-range remote controls are Infrared and RF (Radio Frequency). One of the weaknesses of Infrared is that the signal cannot pass through walls. Therefore, to control a garage door, an RF remote control is necessary. The circuit (transmitter...