GP2015 - based GPS receiver RF front-end circuit
#GPS
#RF front-end
#GP2015
#receiver
#satellite
#navigation
#signal processing
#wireless
#communication
#telecommunication
No description available.
wireless digital code lock with a status display
Warning: Missing argument 2 for wpdb::prepare(), called in /home3/nithish/public_html/btechzone.com/wp-content/plugins/sharebar/sharebar.php on line 112 and defined in /home3/nithish/public_html/btechzone.com/wp-includes/wp-db.php on line 992 Warning: Missing argument 2 for wpdb::prepare(), called in /home3/nithish/public_html/btechzone.com/wp-content/plugins/sharebar/sharebar.php on line 124 and defined in /home3/nithish/public_html/btechzone.com/wp-includes/wp-db.php on line 992 This project...
Remote Operated Spy Robot Circuit
A remote-operated spy robot circuit can be controlled using a wireless remote controller. It captures audio and video information from the surroundings and transmits this data to a remote station via RF signals, with a maximum range of 125 meters,...
Wireless Car Alarm circuit diagram
This circuit is a wireless car alarm system constructed using two modules: a transmitter module and a receiver module. It operates on FM radio waves and is suitable for vehicles with a power supply of 6-12VDC. A voltage stabilizer can...
gps driven clock compasss peedo
This project is a GPS-based clock that displays the current date, automatically adjusts for daylight saving time, shows current speed, maximum speed, and present heading in degrees relative to true north. The original firmware and concept were developed by Ken,...
Latest Wireless Car Alarm circuit diagram and explanation
This circuit is a wireless car alarm system composed of two modules: a transmitter and a receiver. It operates using FM radio waves and is compatible with vehicles that have a 6-12V DC power supply. If the vehicle's power supply...
GPS Jammer
A low-cost device to temporarily disable the reception of the civilian coarse acquisition (C/A) code used for the standard positioning service (SPS) on the Global Positioning System (GPS/NAVSTAR) L1 frequency of 1575.42 MHz. This is accomplished by transmitting a narrowband...
Garage door open indicator
There are battery-powered wireless systems available, but the ones encountered would indicate that the door was open even if it was left ajar for ventilation. A system was desired that would alert when the door was fully raised. Additionally, it...
Adding 1 PPS and 10MHz Outputs to the Z3801A
Enhance the functionality of the Z3801A GPS-disciplined oscillators by making 1 PPS and additional 10 MHz signals accessible from the rear panel. A 1 PPS signal is also provided on the DCD line of the serial connector to enable the...
30m Band Receiver
The direct conversion receiver described consists of only a bandpass filter, mixer IC, VFO and audio filter. With only 22 parts, this simple circuit should take a few hours at the weekend to construct. For extra simplicity, eliminate L1 &...