calradio
Description: Cal-(IT)2 is developing several generations of general broad application radio/networking test platforms for wireless research and development. CalRadio I is the first generation. It provides a simple, low-cost platform for 802.11b development from the MAC layer and up. It accomplishes this by putting all the MAC functionality into C code that runs on a DSP. It uses the Intersil (Conexant) Prism chipset for the physical layer. Additionally, the Texas Instruments C5471 DSP contains an ARM processor that is used to host a small Open Linux operating kernel to provide easy access to programming, downloading, and display/monitoring of data. CalRadio I functions both as a test instrument, an access point, and as a WiFi client. Support for the development was provided by Cal-(IT)2 under the direction of Ramesh Rao. The overall design of the system and development management was by Douglas Palmer with RF support by Don Kimball, both with Cal-(IT)2. The RF module design and initial MAC implementation software were provided by Symbol Technologies through the cooperation of Bob Beach and Kamran Khojasteh. The Code Composer software development studio for the TI TMS320VC5471 was donated by Texas Instruments thanks to Cathy Wicks. CalRadio I consists of three hardware components: MP Board, RF Module and enclosure, and the software/firmware to drive it. The MP board contains all the digital processing, memory, 802.3 Ethernet interface, and serial interface.
CalRadio I serves as a foundational platform for wireless networking research and development, specifically targeting the 802.11b protocol. It integrates a Digital Signal Processor (DSP) that executes the Media Access Control (MAC) layer functionalities entirely in C code, facilitating a streamlined development process. The use of the Intersil Prism chipset establishes the physical layer, ensuring compatibility with existing wireless standards.
The Texas Instruments C5471 DSP is pivotal to this architecture, as it incorporates an ARM processor capable of running a lightweight Open Linux kernel. This kernel allows developers to easily program, download, and monitor data, enhancing the usability of the platform. The versatile nature of CalRadio I allows it to function not only as a testing instrument but also as an access point and a WiFi client, making it suitable for various research applications.
The development of CalRadio I was a collaborative effort, with significant contributions from Cal-(IT)2 under the leadership of Ramesh Rao. Douglas Palmer oversaw the system design and development management, while Don Kimball provided RF support. The RF module design and initial MAC implementation were facilitated by Symbol Technologies, with contributions from Bob Beach and Kamran Khojasteh. Furthermore, Texas Instruments supported the project by donating the Code Composer software development studio tailored for the TI TMS320VC5471, thanks to Cathy Wicks.
The hardware architecture of CalRadio I is comprised of three primary components: the MP Board, the RF Module, and the enclosure. The MP Board is central to the system, housing all digital processing elements, memory, the 802.3 Ethernet interface, and a serial interface. This modular design allows for flexibility and scalability in research and development endeavors, making CalRadio I an essential tool for advancing wireless networking technology.Cal-(IT)2 is developing several generations of general broad application radio/networking test platforms for wireless research and development. CalRadio I is the first generation. It provides a simple, low-cost platform for 802. 11b development from the MAC layer and up. It accomplishes this by putting all the MAC functionality into `C` code that r uns on a DSP. It uses the Intersil (Conexant) Prism chip set for the physical layer. Additionally, the C5471 Texas Instruments DSP contains an ARM processor that is used to host a small Open Linux operating kernel to provide easy access to programming, downloading and display/monitoring of data. CalRadio I functions both as a test instrument, an access point, and as a WiFi client. Support for the development was provided by Cal-(IT)2 under the direction of Ramesh Rao. The overall design of the system and development management was by Douglas Palmer with RF support by Don Kimball, both with Cal-(IT)2.
The RF module design and initial MAC implementation software was provided by Symbol Technologies through the cooperation of Bob Beach and by Kamran Khojasteh. The CodeComposer software development studio for the TI TMS320VC5471 was donated by Texas Instruments thanks to Cathy Wicks.
CalRadio I consists of three hardware components: MP Board, RF Module and enclosure, and the software/firmware to drive it. The MP board contains all the digital processing, memory, 802. 3 Ethernet interface, serial interface and
CalRadio I serves as a foundational platform for wireless networking research and development, specifically targeting the 802.11b protocol. It integrates a Digital Signal Processor (DSP) that executes the Media Access Control (MAC) layer functionalities entirely in C code, facilitating a streamlined development process. The use of the Intersil Prism chipset establishes the physical layer, ensuring compatibility with existing wireless standards.
The Texas Instruments C5471 DSP is pivotal to this architecture, as it incorporates an ARM processor capable of running a lightweight Open Linux kernel. This kernel allows developers to easily program, download, and monitor data, enhancing the usability of the platform. The versatile nature of CalRadio I allows it to function not only as a testing instrument but also as an access point and a WiFi client, making it suitable for various research applications.
The development of CalRadio I was a collaborative effort, with significant contributions from Cal-(IT)2 under the leadership of Ramesh Rao. Douglas Palmer oversaw the system design and development management, while Don Kimball provided RF support. The RF module design and initial MAC implementation were facilitated by Symbol Technologies, with contributions from Bob Beach and Kamran Khojasteh. Furthermore, Texas Instruments supported the project by donating the Code Composer software development studio tailored for the TI TMS320VC5471, thanks to Cathy Wicks.
The hardware architecture of CalRadio I is comprised of three primary components: the MP Board, the RF Module, and the enclosure. The MP Board is central to the system, housing all digital processing elements, memory, the 802.3 Ethernet interface, and a serial interface. This modular design allows for flexibility and scalability in research and development endeavors, making CalRadio I an essential tool for advancing wireless networking technology.Cal-(IT)2 is developing several generations of general broad application radio/networking test platforms for wireless research and development. CalRadio I is the first generation. It provides a simple, low-cost platform for 802. 11b development from the MAC layer and up. It accomplishes this by putting all the MAC functionality into `C` code that r uns on a DSP. It uses the Intersil (Conexant) Prism chip set for the physical layer. Additionally, the C5471 Texas Instruments DSP contains an ARM processor that is used to host a small Open Linux operating kernel to provide easy access to programming, downloading and display/monitoring of data. CalRadio I functions both as a test instrument, an access point, and as a WiFi client. Support for the development was provided by Cal-(IT)2 under the direction of Ramesh Rao. The overall design of the system and development management was by Douglas Palmer with RF support by Don Kimball, both with Cal-(IT)2.
The RF module design and initial MAC implementation software was provided by Symbol Technologies through the cooperation of Bob Beach and by Kamran Khojasteh. The CodeComposer software development studio for the TI TMS320VC5471 was donated by Texas Instruments thanks to Cathy Wicks.
CalRadio I consists of three hardware components: MP Board, RF Module and enclosure, and the software/firmware to drive it. The MP board contains all the digital processing, memory, 802. 3 Ethernet interface, serial interface and
One kind of wireless remote control circuit
The remote control transmitter consists of a DTMF generator and an FM transmitter circuit. A UM91214B phone-specific integrated circuit (IC) is utilized to generate the DTMF signal, with a 3V power supply provided by a 3V zener diode (D1). The...
Wireless Microphone
Q1 amplifies the output from an electret microphone (MIC1). The audio signal is fed into oscillator Q2, which modulates the signal. Additionally, L1 and C1 form a tank circuit designed for operation in the 88-MHz frequency range. The antenna consists...
Wireless remote control switch circuit 5
The wireless remote control transmitter circuit consists of control buttons S1 to S16, resistors R1 to R3, a capacitor C1, a regulator diode VS, a crystal oscillator BC1, and DTMF encoder integrated circuits IC1 and IC2. The circuit components are...
Wireless Fm Microphone
A simple FM wireless microphone utilizes a single BC183C transistor as an audio amplifier, with the option to substitute it with a 2N3565. The transistor Q1 functions as an oscillator that is frequency-modulated by the signal from Q1. Other transistors...
Wireless Keylogger circuit
The Wireless Keylogger consists of two main building blocks: the transmitter and the receiver. The actual keylogging takes place in the transmitter, which is in fact a PS/2 hardware keylogger, with a built-in 2.4 GHz wireless module. Captured keystroke data...
Wireless Ir Security System
This system consists of an infrared (IR) transmitter, an IR receiver combined with an RF transmitter, and an RF receiver that activates an alert beeper. The IR transmitter utilizes two LEDs to emit a pulsed beam of invisible infrared light...
Electronic Mini Projects
The Wireless Imaging Intruder Alarm application allows home security smartphones to detect and send pictures of burglars directly to personal cell phones, PDAs, or computers within seconds of a break-in at homes or businesses when the owner is away. Code...
Wireless-video-camera-link
This high-performance video camera link transmits signals from a video camera to a VCR or from a VCR to televisions throughout a home. The initial stage of the RF chain is a crystal-controlled oscillator, Q1, operating at a frequency range...
Wireless IR Headphones circuit
This wireless infrared (IR) headphones circuit project enables the transmission of audio signals through an infrared connection. The circuit consists of two main components: a transmitter and a receiver. Unlike radio frequency (RF) transmitters, both parts of this application must...