simple switching power supply 15 watt

Description: The pulse transformer T1 utilizes a ferrite core, specifically M2500NMS-2 or M2000NM9, with dimensions of Sh5h5 (cross-section of the magnetic coils at 5G—5 mm with a center gap). The winding wire is of type PEL-2. The primary winding consists of 2 turns of wire with a diameter of 0.1 mm, and 3-4 turns of wire with a diameter of 0.25 mm, along with 5-6 turns of the same wire used for the primary winding.

The schematic diagram is derived from a circuit designed for a simple switching power supply with a power output of 15 watts. Further details regarding this power supply and its related circuit diagram can be found on the corresponding page.

The pulse transformer T1 is a critical component in the switching power supply circuit, facilitating energy transfer between the primary and secondary windings while ensuring voltage isolation. The choice of ferrite core material, such as M2500NMS-2 or M2000NM9, is pivotal for achieving the desired magnetic properties, which influence the efficiency and performance of the transformer. The specified cross-section of 5 mm at the 5G location, combined with a central gap, optimizes the magnetic flux and minimizes core losses during operation.

The winding configuration is designed to achieve specific electrical characteristics. The primary winding, consisting of 2 turns of 0.1 mm diameter wire, is crucial for generating the initial magnetic field. The additional turns of 0.25 mm diameter wire enhance the transformer's ability to handle higher voltages and currents. The inclusion of 5-6 turns of wire identical to the primary winding serves to increase the coupling efficiency and improve the overall performance of the transformer.

In the context of the simple switching power supply, the transformer plays a vital role in converting the input voltage to the desired output voltage while maintaining regulation and minimizing ripple. The circuit design utilizes the transformer to facilitate the switching process, allowing for efficient energy conversion and management.

For a comprehensive understanding of the operation and integration of the pulse transformer within the switching power supply, it is advisable to review the complete circuit diagram and accompanying explanations provided on the designated page. This will provide insights into the overall design philosophy, component interactions, and operational principles governing the power supply system.Pulse transformer T1 is performed on the ferrite core M2500NMS-2 or M2000NM9 Sh5h5 size (cross-section of the magnetic coils at the location of 5G—5 mm with a gap in the center). Winding wire is made brand PEL-2. Winding 1. 2 turns of wire contains 600 0. 1 mm in diameter, 3-4 44 turns of 0. 25 mm diameter, 5-6 10 turns in the same wire as the primary winding. The schematic diagram come from circuit: Simple Switching Power Supply 15 Watt power supply. Go to that page to read the explanation about above power supply related circuit diagram.