Schematics power supply switching PCB
#switching
#transistor
#operational amplifier
#voltage regulator
#12V
#10A
#PCB
#feedback circuit
#discrete components
Description: The switching power supply provides 12 volts at a maximum of 10 amps, utilizing a discrete transistor regulator with an operational amplifier acting as a comparator in the feedback circuit. The schematic does not depict the front panel power-on indicator. This unit lacks an adjustable current limiter; however, components R1, R2, R3, Q2, R8, R9, C5, and Q4 establish a current limit of approximately 10 amps. The design closely resembles that of a linear power supply, with the addition of L1 and D1, and U1 operating in a switching mode as a comparator with a small amount of hysteresis. The switching frequency of this unit varies according to the output current drawn by the load, which is an undesirable characteristic. This variability is a reason why PWM (Pulse Width Modulation) regulators are preferred in modern applications, as they maintain a constant switching frequency, generating spurious signals only at known discrete frequencies rather than across a broad spectrum. The Darlington-connected pass transistor block appears twice in the schematic (configured in parallel) to enhance robustness. R4 serves as an internal trim-pot, allowing for the output voltage to be adjusted anywhere between 5 to 15 volts.
The switching power supply described operates by converting input voltage to a regulated output voltage of 12 volts while ensuring a maximum current capacity of 10 amps. The use of a discrete transistor regulator in conjunction with an operational amplifier as a comparator is a critical aspect of the feedback mechanism, allowing for precise control of the output voltage. The absence of a front panel power-on light in the schematic may suggest a design focused on functionality without additional user interface elements.
The current limiting feature, while not adjustable, is effectively managed by the specified components, which work together to ensure that the output current does not exceed 10 amps. This limitation is crucial for protecting both the power supply and connected loads from overcurrent conditions. The addition of inductive component L1 and diode D1 indicates an effort to minimize voltage spikes and enhance the overall performance of the switching regulator.
The operational behavior of this power supply is characterized by its variable switching frequency, which adjusts in response to load changes. This characteristic can lead to inefficiencies and electromagnetic interference, making PWM regulators a more favorable choice in contemporary designs. PWM technology allows for a stable switching frequency, significantly reducing the potential for spurious emissions and improving overall efficiency.
The inclusion of a Darlington pair in the pass transistor stage provides high current gain and robustness, ensuring the power supply can handle the maximum load without significant thermal stress or degradation. The parallel configuration of the Darlington-connected transistors adds redundancy, further enhancing reliability during operation.
Finally, the internal trim-pot (R4) offers flexibility in output voltage adjustment, allowing the user to set the output anywhere between 5 to 15 volts. This feature makes the power supply versatile for various applications, accommodating different voltage requirements while maintaining stability and performance.The switching power supply provides 12 volts, at 10 amps, maximum, using a discrete transistor regulator with an op-amp functioning as a comparator in the feedback circuit. With reference to the schematic, the front panel power-on light is not shown. There is no adjustable current limiter in this unit, although R1, R2, R3, Q2, R8, R9, C5 and Q4 se t the current limit to approximately 10 amps. As you can see, the design is very similar to that of a linear power supply, except that L1, and D1 have been added, and U1 operates in a switching mode as a comparator with a small amount of hystersis. The switching frequency of this unit varies with the output current drawn by the load. This is an undesireable feature, which is why PWM regulators are used today. With a PWM regulator, the switching frequency is constant and will produce spurs only at known discrete frequencies rather than spurs at all frequencies.
The Darlington-connected pass transistor block in the schematic is there twice (in parallel) for robustness. R4 in an internal trim-pot that can set the output voltage anywhere between 5 to 15 volts.
The switching power supply described operates by converting input voltage to a regulated output voltage of 12 volts while ensuring a maximum current capacity of 10 amps. The use of a discrete transistor regulator in conjunction with an operational amplifier as a comparator is a critical aspect of the feedback mechanism, allowing for precise control of the output voltage. The absence of a front panel power-on light in the schematic may suggest a design focused on functionality without additional user interface elements.
The current limiting feature, while not adjustable, is effectively managed by the specified components, which work together to ensure that the output current does not exceed 10 amps. This limitation is crucial for protecting both the power supply and connected loads from overcurrent conditions. The addition of inductive component L1 and diode D1 indicates an effort to minimize voltage spikes and enhance the overall performance of the switching regulator.
The operational behavior of this power supply is characterized by its variable switching frequency, which adjusts in response to load changes. This characteristic can lead to inefficiencies and electromagnetic interference, making PWM regulators a more favorable choice in contemporary designs. PWM technology allows for a stable switching frequency, significantly reducing the potential for spurious emissions and improving overall efficiency.
The inclusion of a Darlington pair in the pass transistor stage provides high current gain and robustness, ensuring the power supply can handle the maximum load without significant thermal stress or degradation. The parallel configuration of the Darlington-connected transistors adds redundancy, further enhancing reliability during operation.
Finally, the internal trim-pot (R4) offers flexibility in output voltage adjustment, allowing the user to set the output anywhere between 5 to 15 volts. This feature makes the power supply versatile for various applications, accommodating different voltage requirements while maintaining stability and performance.The switching power supply provides 12 volts, at 10 amps, maximum, using a discrete transistor regulator with an op-amp functioning as a comparator in the feedback circuit. With reference to the schematic, the front panel power-on light is not shown. There is no adjustable current limiter in this unit, although R1, R2, R3, Q2, R8, R9, C5 and Q4 se t the current limit to approximately 10 amps. As you can see, the design is very similar to that of a linear power supply, except that L1, and D1 have been added, and U1 operates in a switching mode as a comparator with a small amount of hystersis. The switching frequency of this unit varies with the output current drawn by the load. This is an undesireable feature, which is why PWM regulators are used today. With a PWM regulator, the switching frequency is constant and will produce spurs only at known discrete frequencies rather than spurs at all frequencies.
The Darlington-connected pass transistor block in the schematic is there twice (in parallel) for robustness. R4 in an internal trim-pot that can set the output voltage anywhere between 5 to 15 volts.
Discrete Voltage Regulator
The title of this article raises the question of why the extensive selection of fully integrated voltage regulators should be supplemented with a version built using discrete components. Specifically, what advantages does this circuit provide that the well-known three-terminal regulators...
Basic reference transistor bias circuit - Mixed Negative feedback
Basic reference transistor bias circuit - Mixed Negative feedback
The basic reference transistor bias circuit utilizing mixed negative feedback is a fundamental electronic configuration designed to stabilize the operating point of a transistor. This circuit typically employs a combination of resistive...
12v iPad Charger
After experiencing failures with four Apple iPad chargers and not wishing to incur further expenses by purchasing replacements from Apple, a decision was made to create 12V powered chargers. This would utilize the surplus photovoltaic (PV) power available during daytime...
Steady flow of power transistor circuit
Characterized by a steady flow of power when the power supply voltage fluctuates or the load changes, this circuit maintains a constant load current. The output current of the circuit is illustrated in Figure 4A. When the load varies from...
improved 3 transistor audio amp
This circuit is similar to the previous one but employs positive feedback to enhance the amplitude delivered to the speaker. It is adapted from a small 5-transistor radio that utilizes a 25-ohm speaker. In the earlier circuit, the load resistor...
Transistor Current Amplifier Circuit
In a prior post titled "Timing is Everything," the application of PWM (Pulse Width Modulation) signals for controlling devices such as LEDs was discussed. This technique is particularly beneficial when working with digital devices, including microchips and microcontrollers, which often...
Dual Regulated Power Supply
The 7815 regulates the positive supply, while the 7915 regulates the negative supply. The transformer should have a primary rating of 240/220 volts for Europe or 120 volts for North America. The center-tapped secondary coil should be rated approximately 18...
TRANSISTORIZED AM RADIO
The schematic illustrates a standard AM radio circuit utilizing NPN transistors. This generic circuit does not provide specific values for all components, serving instead as a reference point for experimenters to begin their projects.
The schematic of a typical transistor AM...
Automatic 12 Volt Lamp Fader
This circuit resembles the "Fading Red Eyes" circuit found in the LED section, designed to fade a pair of red LEDs. In this iteration, the lamps are dimmed by adjusting the duty cycle, allowing for the use of higher power...