desktop power supply
#desktop
#voltage regulator
#DC power
#bench supply
#adjustable output
#electronics lab
#constant voltage
#constant current
#LM317
#DIY power supply
No description available.
Simple LM317 variable voltage supply does it limit current too
Assuming a 5V output can be achieved after adjusting the potentiometer, will the 240-ohm resistor limit the current, or is there a need to add additional components? If it does limit the current, it is expected that the power rating...
Tracking Double-Output Bipolar Supply Circuit
This circuit is useful for a bench supply in the lab. Separate or tracking operation is possible. The regulators should be properly heatsinked. Tl is a 24-Vac wall transformer of suitable current capacity.
The described circuit functions as a laboratory bench...
0-50V 1A power supply with CA3086
This power supply circuit is highly stabilized that its output voltage will drop only 0.005% even though the load changes from 0 to 100%. Another excellent capability is that the output voltage will change only by 0.01% if the input...
ISL62391
The ISL62391 controller generates supply voltage for battery-powered systems. It includes two pulse-width modulation (PWM) controllers, adjustable from 0.6V to 5.5V, and a linear regulator (LDO3) that generates a fixed 3.3V and can deliver up to 100mA. The ISL62391 includes...
Schematic for voltage regulation via lm317
A simple lab power supply using the LM317 is based on the initial schematic. To prevent damage to the digital multimeter (DMM) when measuring milliamperes, a switchable current limiter is desired. However, there is uncertainty regarding the integration of this...
constant current battery charger
A straightforward method for charging a battery using a higher voltage source is illustrated in the accompanying circuit diagram. The circuit requires only one resistor to establish the desired charging current, which can be determined by dividing the voltage difference...
Automobile-voltage-regulator
A monolithic 555-type timer serves as the core component of this straightforward automobile voltage regulator. When the timer is inactive, resulting in a low output at pin 3, the power Darlington transistor pair remains off. If the battery voltage drops...
variable power supply with l200
The voltage output is controlled by a 10K variable resistor. The output voltage range is approximately 3 to 15 volts, with a current range of about 10mA minimum and 2A maximum. When the current limit is reached, the output voltage...
Low Ohms Adaptor For DMMs Based On An LM317 Regulator
This adapter circuit functions as a 100mA constant current source. It is connected across a low-value resistor, the resistance of which is to be measured, and the resulting voltage drop can then be assessed using a digital multimeter (DMM). Setting...