High-frequency crystal oscillator
#high-frequency
#crystal oscillator
#MECL
#frequency doubler
#MC10101
#MC1662
#100 MHz
#LC tank circuit
#phase shifter
Description: A high-speed oscillator can be created by integrating an MECL 10 crystal oscillator with an MECL III frequency doubler. One section of the MC10101 is configured as a 100 MHz crystal oscillator, with the crystal placed in series within the feedback loop. An LC tank circuit is utilized to tune the 100 MHz harmonic of the crystal and can be employed to calibrate the circuit to the precise frequency. A second section of the MC10101 acts as a buffer for the crystal oscillator, producing complementary 100 MHz output signals. The frequency doubler is composed of two MC10101 gates functioning as phase shifters and two MC1662 NOR gates. To achieve a 50% duty cycle at the output, a delay of 90° must be introduced to the true and complement 100 MHz signals.
This configuration can be accurately constructed using 2.5 ns delay lines for the 200 MHz output or can be approximated with the two MC10101 gates, which are simpler to integrate and introduce minimal skew in the output signal duty cycle. The MC1662 gates combine the four-phase 100 MHz signals as depicted in Figure B. The outputs of the MC1662 gates are wire-OR connected to generate the 200 MHz signal. MECL III gates are selected due to their capability to handle the bandwidth requirements for 200 MHz signals. Additionally, one of the remaining MC1662 gates serves as a VBB bias generator for the oscillator. By linking the NOR output back to the input, the circuit stabilizes at the midpoint of the logic swing, or at VBB. A 0.001 µF capacitor is included to prevent oscillation within the VBB circuit.
The schematic design includes the following components and their interconnections:
1. **MC10101 Crystal Oscillator Configuration**:
- One MC10101 gate is configured as a crystal oscillator, with a crystal connected in series with the feedback loop. The LC tank circuit is tuned to resonate at 100 MHz, ensuring stable oscillation at the desired frequency.
2. **Buffer Stage**:
- A second MC10101 gate buffers the output of the crystal oscillator, providing complementary outputs that maintain the integrity of the 100 MHz signal.
3. **Frequency Doubler Circuit**:
- The frequency doubler consists of two MC10101 gates that act as phase shifters, along with two MC1662 NOR gates. The phase shifters introduce the necessary delay to achieve a 90° phase difference, allowing for the generation of a 200 MHz signal with a 50% duty cycle.
4. **Combining Outputs**:
- The outputs from the MC1662 gates are wire-OR connected to create the final 200 MHz output signal. This method ensures that the combined output retains the necessary signal characteristics.
5. **Bias Generation**:
- One MC1662 gate is utilized as a VBB bias generator, stabilizing the circuit by connecting the NOR output to the input. This configuration allows the oscillator to operate within the optimal voltage range, ensuring reliable performance.
6. **Capacitance for Stability**:
- A 0.001 µF capacitor is connected to the VBB circuit to filter out any potential oscillations, thereby enhancing the stability of the oscillator circuit.
Overall, this high-speed oscillator design effectively combines crystal oscillation principles with modern digital logic components to achieve precise frequency generation suitable for high-frequency applications.A high speed oscillator is possible by combining an MECL 10 crystal oscillator with an MECL III frequency doubler as shown. One section of the MC10101 is connected as a 100 MHz crystal oscillator with the crystal in series with the feedback loop.
The LC tank circuit tunes the 100 MHz harmonic of the crystal and may be used to calibrate the circuit to the exact frequency. A second section of the MC10101 buffers the crystal oscillator and gives complementary 100 MHz signals.
The frequency doubler consists of two MC10101 gates as phase shifters and two MC1662 NOR gates. For a 50% duty cycle at the output, the delay to the true and complement 100 MHz signals should be 90°. This may be built precisely with 2.5 ns delay lines for the 200 MHz output or approximated by the two MC10101 gates. The gates are easier to incorporate and cause only a slight skew in output signal duty cycle. The MCI662 gates combine the 4 phase 100 MHz signals as shown in Figure B. The outputs of the MC1662's are wire-OR connected to give the 200 MHz signal. MECL III gates are used because of the bandwidth required for 200 MHz signals. One of the remaining MC1662 gates is used as a VBB bias generator for the oscillator. By connecting the NOR output to the input, the circuit stays in the center of the logic swing or at VBB.
A 0.001 µ¥ capacitor ensures the VBB circuit does not oscillate.
This configuration can be accurately constructed using 2.5 ns delay lines for the 200 MHz output or can be approximated with the two MC10101 gates, which are simpler to integrate and introduce minimal skew in the output signal duty cycle. The MC1662 gates combine the four-phase 100 MHz signals as depicted in Figure B. The outputs of the MC1662 gates are wire-OR connected to generate the 200 MHz signal. MECL III gates are selected due to their capability to handle the bandwidth requirements for 200 MHz signals. Additionally, one of the remaining MC1662 gates serves as a VBB bias generator for the oscillator. By linking the NOR output back to the input, the circuit stabilizes at the midpoint of the logic swing, or at VBB. A 0.001 µF capacitor is included to prevent oscillation within the VBB circuit.
The schematic design includes the following components and their interconnections:
1. **MC10101 Crystal Oscillator Configuration**:
- One MC10101 gate is configured as a crystal oscillator, with a crystal connected in series with the feedback loop. The LC tank circuit is tuned to resonate at 100 MHz, ensuring stable oscillation at the desired frequency.
2. **Buffer Stage**:
- A second MC10101 gate buffers the output of the crystal oscillator, providing complementary outputs that maintain the integrity of the 100 MHz signal.
3. **Frequency Doubler Circuit**:
- The frequency doubler consists of two MC10101 gates that act as phase shifters, along with two MC1662 NOR gates. The phase shifters introduce the necessary delay to achieve a 90° phase difference, allowing for the generation of a 200 MHz signal with a 50% duty cycle.
4. **Combining Outputs**:
- The outputs from the MC1662 gates are wire-OR connected to create the final 200 MHz output signal. This method ensures that the combined output retains the necessary signal characteristics.
5. **Bias Generation**:
- One MC1662 gate is utilized as a VBB bias generator, stabilizing the circuit by connecting the NOR output to the input. This configuration allows the oscillator to operate within the optimal voltage range, ensuring reliable performance.
6. **Capacitance for Stability**:
- A 0.001 µF capacitor is connected to the VBB circuit to filter out any potential oscillations, thereby enhancing the stability of the oscillator circuit.
Overall, this high-speed oscillator design effectively combines crystal oscillation principles with modern digital logic components to achieve precise frequency generation suitable for high-frequency applications.A high speed oscillator is possible by combining an MECL 10 crystal oscillator with an MECL III frequency doubler as shown. One section of the MC10101 is connected as a 100 MHz crystal oscillator with the crystal in series with the feedback loop.
The LC tank circuit tunes the 100 MHz harmonic of the crystal and may be used to calibrate the circuit to the exact frequency. A second section of the MC10101 buffers the crystal oscillator and gives complementary 100 MHz signals.
The frequency doubler consists of two MC10101 gates as phase shifters and two MC1662 NOR gates. For a 50% duty cycle at the output, the delay to the true and complement 100 MHz signals should be 90°. This may be built precisely with 2.5 ns delay lines for the 200 MHz output or approximated by the two MC10101 gates. The gates are easier to incorporate and cause only a slight skew in output signal duty cycle. The MCI662 gates combine the 4 phase 100 MHz signals as shown in Figure B. The outputs of the MC1662's are wire-OR connected to give the 200 MHz signal. MECL III gates are used because of the bandwidth required for 200 MHz signals. One of the remaining MC1662 gates is used as a VBB bias generator for the oscillator. By connecting the NOR output to the input, the circuit stays in the center of the logic swing or at VBB.
A 0.001 µ¥ capacitor ensures the VBB circuit does not oscillate.
Colpitts Crystal Oscillator
A Crystal Colpitts oscillator can be constructed using a parallel mode crystal and a transistor. The circuit is depicted in the accompanying figure. In this configuration, an inductance is utilized.
The Crystal Colpitts oscillator is a type of electronic oscillator that...
Crystal oscillator II
This circuit utilizes an LT1011 comparator biased in its linear mode along with a crystal to set its resonant frequency. It can achieve a clock frequency of a few hundred kHz that is temperature-independent, with an approximate duty cycle of...
Crystal Oscillator Frequency Converter
The circuit was designed to create a frequency converter using a crystal oscillator for the conversion of 10 MHz to 1 MHz. It incorporates a 7404 hex inverter.
The circuit functions as a frequency divider, utilizing a crystal oscillator to generate...
VERY LOW POWER GATED CRYSTAL OSCILLATOR
The circuit controls the output of a continuously operating 32KHz crystal oscillator, directing it to the input of a C-MOS buffer when clock pulses are required. This technique addresses the issue of a slow-starting crystal oscillator by maintaining the oscillator's...
Incorrect frequency from crystal oscillator
An old Eistar SJ-1 digital pulser has been acquired. However, the frequency it generates is consistently 66% of the expected output. The frequency observed at the frequency stage (Pin 11) is 66% of the 16 MHz crystal, which equates to...
The local oscillator for 10.7 to 2.5MHz conversion
A 52 MHz third overtone crystal typically has a series resonance impedance of 30 ohms as per manufacturer specifications. The crystals utilized in the prototypes exhibit nearly ten times lower series resistance but are significantly more expensive. An oscillator can...
Crystal Oscillator Design
This circuit is a crystal oscillator that operates at a frequency of 3.5 MHz.
The crystal oscillator circuit utilizes a quartz crystal resonator to generate a stable frequency output. The primary components typically include the crystal, an amplifier (often a transistor...
IC-compatible crystal oscillator
Resistors R1 and R2 stabilize the temperature of the NAND gates and ensure that the gates operate within a linear region during startup. Capacitor C1 acts as a DC block and must have an impedance lower than Vw at the...
SM5021 Crystal Oscillator Module IC
The CF8223A is an FSK (Frequency Shift Keying) decoder and DTMF (Dual Tone Multi-Frequency) receiver integrated circuit (IC). It is manufactured using a CMOS process and includes a power-down feature for low power dissipation operation. The FSK decoder and DTMF...