The monitoring substation based on MSP430 and PROFIBUS is designed
#MSP430
#PROFIBUS
#monitoring
#substation
#industrial communication
#embedded systems
#data acquisition
#automation
No description available.
Fast data aquisition 2
A low-cost, high-speed monolithic analog multiplexer. The system operates by selecting a channel and initiating a conversion at a gain (G) of 1. It then examines the most significant bit (MSB) of the conversion result. If the MSB equals 1,...
AirBorn Electronics project
Embedded system design engineers create examples of their work from the 1990s era.
Embedded systems have evolved significantly since the 1990s, and the design work from that period reflects the technological limitations and innovations of the time. Engineers in this field...
Msp430c112 Irda Sir Encoder/decoder
The MT8870 is a complete DTMF receiver that integrates both the band-split filter and digital decoder functions. The filter section employs switched capacitor techniques for high and low group filters, while the decoder utilizes digital counting methods to detect and...
Practical Data Acquisition using a Windows based Power Meter
This application note outlines the design of a PC-based, 14-bit data acquisition system. It adopts a systematic approach, incorporating all essential components: analog, digital, hardware, and software. The document elaborates on each phase, emphasizing the testing of individual systems prior...
High Resolution 24-bit Data Acquisition System instrument-control
The Wildcard requires a minimum of 8 volts on the V+Raw power rail, which must not exceed 26 volts. When using the Docking Panel or Power Dock, the V+Raw rail is automatically connected. If not using a dock, manual connection...
MSP430 Series
A crystal with a small load capacitance of 7.0 pF allows for larger oscillation amplitude, reduced current consumption, and decreased frequency stability, as indicated in the table below. The optimal load capacitance for the crystal is influenced by the actual...
Objects in Flux
The Open Source Automation project is a free automation software that operates on Windows and does not require programming for setup. It features a user-friendly graphical interface and includes unique functionalities that are not typically found in high-end security and...
the design of the radar for back running vehicle of MSP430
The development of advanced driving assistance systems and automotive electronics is increasingly reliant on interconnected technologies. A new radar system for reversing vehicles is designed to perform serial range finding and accurately measure the distance to obstacles, while also possessing...
Interfacing MSP430 to analog AC-rated humitidy resistive sensor HCZ-H8
If a sensor is resistive, an alternating current (AC) is equivalent to pulsed direct current (DC), and the sensor will degrade based on the root mean square (RMS) value of the AC signal. Applying 1V AC RMS is effectively the...