Autopilot UAV Project
No description available.
Diagram description GPS support kit
The GPS interface can be fed in 2 ways: with a stabilized 5V supply or with a 10 to 25V unregulated DC supply. In both cases, the power is fed into the RJ45 connector on point 8. Pin 7 is...
gps receiver for kenwood tm d710e
The mobile rig, a Kenwood TM-D710E, required a GPS receiver for APRS use. The GPS-710 was not readily available and was quite expensive, prompting the decision to build a custom solution. A Royaltek RGM-3600 GPS receiver was purchased on eBay...
The Finder
The Finder is a prototype GPS device designed to be keychain-sized, featuring two buttons labeled "Save" and "Find." The "Save" button records the current location, while the "Find" button guides the user back to the saved location. Up to nine...
interface gps with avr
A GPS modem is a device that receives signals from satellites and provides information about latitude, longitude, altitude, and time. GPS navigators are commonly used in mobile devices to track road maps. The GPS modem includes an antenna that captures...
Sensors and Sensing
The ability to perceive colors, shapes, distances, spatial relationships, motion, and connectivity is integral to human experience and cognition. This perceptual framework enables interpretation of sensory information through a complex model of the environment. Robots, however, lack such inherent models...
the Open GPS Tracker
The tracker is straightforward to construct on a perfboard. A basic one-pad-per-hole perfboard and 26-gauge wire are recommended, although 30-gauge wire may be more suitable. All electronic components can be sourced from Mouser Electronics, while Radio Shack offers the perfboard...
autopilot with rev 2.2 board
The servo driver is just simply two 4017 decade counters and lots of 0.1" headers. Only populate the A side headers; the B servo bank is optional and will require a few more header pieces. If you received 20 headers,...
GPS RS232 Dev Board
Once the setup of an RS232 connection is understood, it becomes a straightforward process for future projects. This design features a compact SMD version of the power supply, which can also be constructed using through-hole components on a breadboard. The...
PC Based GPS
The advent of new high-speed technologies and the growing computer capacity provided realistic opportunity for new cost effective technologies and realization of new methods of innovations. This technical improvement together with the need for high performance techniques created faster, more...