Pocket white-LED torch is power efficient
#LED
#torch
#power efficient
#rechargeable battery
#white-LED
#portable
#DIY
#energy saving
#compact
Description: This single white LED torch can be housed in an empty glue stick tube and has a long rechargeable battery life.
The proposed circuit design features a compact LED torch that utilizes a single white LED as the primary light source. The housing for this device is derived from a repurposed glue stick tube, which provides a lightweight and portable structure. The design incorporates a rechargeable battery, ensuring extended usage without the need for frequent replacements.
The circuit consists of several key components:
1. **LED**: A single white LED is selected for its efficiency and brightness. The LED operates at a forward voltage of approximately 3.0-3.2V and requires a current of around 20mA for optimal performance.
2. **Power Supply**: A rechargeable lithium-ion battery, typically rated at 3.7V, is employed to power the LED. This battery type is favored for its high energy density and ability to be recharged multiple times.
3. **Resistor**: To limit the current flowing through the LED and prevent damage, a current-limiting resistor is included in the circuit. The value of this resistor can be calculated using Ohm's Law: R = (V_battery - V_LED) / I_LED. For example, with a 3.7V battery and a 3.2V LED at 20mA, the resistor value would be approximately 25 ohms.
4. **Switch**: A simple on/off switch is integrated into the circuit to allow the user to control the operation of the torch easily.
5. **Charging Circuit**: To facilitate recharging of the lithium-ion battery, a charging circuit can be included. This may consist of a microcontroller or dedicated charging IC that manages the charging process, ensuring safety and efficiency.
The entire assembly can be encased within the glue stick tube, with the LED positioned at one end to provide illumination. The other end can be sealed or fitted with a cap that allows access to the charging port, ensuring that the torch remains functional while maintaining a sleek and compact design.
This design not only promotes sustainability through the reuse of materials but also offers a practical solution for portable lighting needs.This single white-LED torch can be housed in an empty glue-stick tube and has a long rechargeable-battery life..
The proposed circuit design features a compact LED torch that utilizes a single white LED as the primary light source. The housing for this device is derived from a repurposed glue stick tube, which provides a lightweight and portable structure. The design incorporates a rechargeable battery, ensuring extended usage without the need for frequent replacements.
The circuit consists of several key components:
1. **LED**: A single white LED is selected for its efficiency and brightness. The LED operates at a forward voltage of approximately 3.0-3.2V and requires a current of around 20mA for optimal performance.
2. **Power Supply**: A rechargeable lithium-ion battery, typically rated at 3.7V, is employed to power the LED. This battery type is favored for its high energy density and ability to be recharged multiple times.
3. **Resistor**: To limit the current flowing through the LED and prevent damage, a current-limiting resistor is included in the circuit. The value of this resistor can be calculated using Ohm's Law: R = (V_battery - V_LED) / I_LED. For example, with a 3.7V battery and a 3.2V LED at 20mA, the resistor value would be approximately 25 ohms.
4. **Switch**: A simple on/off switch is integrated into the circuit to allow the user to control the operation of the torch easily.
5. **Charging Circuit**: To facilitate recharging of the lithium-ion battery, a charging circuit can be included. This may consist of a microcontroller or dedicated charging IC that manages the charging process, ensuring safety and efficiency.
The entire assembly can be encased within the glue stick tube, with the LED positioned at one end to provide illumination. The other end can be sealed or fitted with a cap that allows access to the charging port, ensuring that the torch remains functional while maintaining a sleek and compact design.
This design not only promotes sustainability through the reuse of materials but also offers a practical solution for portable lighting needs.This single white-LED torch can be housed in an empty glue-stick tube and has a long rechargeable-battery life..
Fish Tank Lights and Temperature Detector
When the tank is cleaned the fish are removed and placed in a small amount of the tank water. The problem is that fish don’t like rapid temperature fluctuations. A simple in-tank or stick-on thermometer would have sufficed, but adding...
High-intensity LED Warning Flasher
This circuit is designed as a warning flasher to alert road users to dangerous situations in the dark. It can also serve as a bicycle light, subject to traffic regulations and legislation. White LEDs are recommended when the circuit is...
28 LED Clock Timer
28 LED Clock Timer Circuit. This is a programmable clock timer circuit that uses individual LEDs to indicate hours and minutes. Twelve LEDs can be arranged in a circle to represent the 12 hours of a clock face, along with...
Solar LED light schematic
Purchase a 1W white LED and utilize a mobile phone battery to create a small lamp. A lampshade can be made from a glass-like milky white plastic bottle. The LED emits light through a radiating plate, which has two leads...
Mini Led Flashlight with LT1073 IC
This LED lamp circuit can be utilized as a mini LED flashlight. When paired with a 1.2 V rechargeable battery, all components can be housed within a compact enclosure.
The mini LED flashlight circuit typically consists of several key components: an...
LED voltmeter schematic needed
A simple LED-based voltmeter is required to monitor the voltage of a variable power supply.
The proposed LED voltmeter circuit utilizes a series of light-emitting diodes (LEDs) to visually represent the voltage level of a variable power supply. This circuit...
Led flasher
A relaxation oscillator is employed to flash an LED in the base circuit. The capacitor C1 is charged slowly through resistor R1 by the power source, and then it is discharged periodically through resistor R3 and the LED by the...
Propeller Clock Mechanically Scanned LED Clock
A motor spins the "propeller", and a small microprocessor keeps track of time and changes the pattern on seven LEDs with exact timing to simulate a 7 by 30 array of LEDs. It is an illusion, but it works nicely.
The...
Multicolor HD LED
Most PC enclosures provide only a single LED to indicate hard disk access, which is connected to the motherboard via a two-pin connector. However, this LED only functions with IDE drives, and if a SCSI disk controller is installed, its...