led workbench lighting
#LED
#voltage regulator
#portable
#workbench lighting
#high-brightness
#dc power
#electronics hobbyist
#inspection lamp
Description: A highly practical workbench lighting unit designed for electronics hobbyists. The portable inspection lamp circuit features an onboard voltage regulator and a high-brightness 5mm white LED. It can be powered by any 9 to 18 volt DC-rated AC mains adapter that is capable of supplying approximately 100 mA of output current. Upon construction, the LED workbench light circuit should be housed in a suitable plastic bottle cap, as illustrated. An optional miniature lens can be included; in the prototype, a plastic lens salvaged from a discarded torch was utilized. The adjustable 3-pin voltage regulator IC1 (LM317L) in a TO-92 package is configured to provide an output of approximately 4.5 volts DC. This output is directly supplied to the white LED (D2) through a current limiting resistor R3 (51 Ohm). Diode D1 (1N4001) serves as an input polarity protection device, while two small electrolytic capacitors (C1 and C2) connected to the input and output pins of IC1 enhance the overall stability of the regulator circuit. A standard RCA or EP socket is recommended as the input terminal J1.
The workbench lighting unit is designed to be compact and efficient, making it ideal for hobbyists who require portable illumination for detailed electronic projects. The use of the LM317L voltage regulator allows for adjustable output voltage, which is crucial for ensuring that the LED operates within its specified ratings, thus prolonging its lifespan and maintaining brightness. The choice of a 5mm white LED is significant due to its high luminous efficacy, providing ample light for inspection tasks without generating excessive heat.
The input power source is versatile, accommodating a range of 9 to 18 volts, which allows for flexibility depending on the available power supply. The current rating of 100 mA is sufficient for driving the LED while also providing headroom for additional components if necessary. The inclusion of the 51 Ohm resistor (R3) is essential for limiting the current flowing through the LED, protecting it from potential overcurrent conditions that could lead to failure.
The use of the 1N4001 diode (D1) ensures that the circuit is safeguarded against reverse polarity connections, which can occur if the power supply is connected incorrectly. This feature is particularly important in portable applications where users may frequently connect and disconnect the power supply.
Electrolytic capacitors C1 and C2 are used to filter any voltage spikes or noise from the power supply, ensuring that the voltage regulator operates smoothly. This filtering is critical for maintaining the stability of the output voltage, which directly affects the performance of the LED.
Overall, this portable inspection lamp circuit represents a robust solution for workbench lighting, combining simplicity with effective design principles to meet the needs of electronics enthusiasts. The option to enclose the circuit in a plastic bottle cap not only provides a protective housing but also contributes to the portability of the device, making it easy to transport and use in various settings. The optional lens enhances the focus of the light, allowing for better visibility of intricate components during work.A very useful workbench lighting unit for electronics hobbyists. The portable inspection lamp circuit consists of an on-board voltage regulator and a high-bright 5mm white LED. Any 9 to 18 volt dc rated ac mains adaptor, capable to source about 100 mA of output current can be used to power this portable inspection lamp.
After construction the led workbench light circuit should be enclosed in a suitable plastic bottle cap as illustrated here. The miniature lens shown is an optional component. In the prototype, plastic made lens lifted from a discarded torch was used! The adjustable 3-pin voltage regulator IC1 (LM317L) in TO-92 pack, is here tuned to supply an output of near 4.
5 volt dc. This supply is directly fed to the white LED (D2) through the current limiter resistor R3 (51 Ohm). Diode D1 (1N4001) works as an input polarity protection guard and two small electrolytic capacitors (C1 and C2) connected at the input and output pins of IC1 improves the overall stability of the regulator circuit. Use a standard RCA or EP socket as the input terminal J1.
The workbench lighting unit is designed to be compact and efficient, making it ideal for hobbyists who require portable illumination for detailed electronic projects. The use of the LM317L voltage regulator allows for adjustable output voltage, which is crucial for ensuring that the LED operates within its specified ratings, thus prolonging its lifespan and maintaining brightness. The choice of a 5mm white LED is significant due to its high luminous efficacy, providing ample light for inspection tasks without generating excessive heat.
The input power source is versatile, accommodating a range of 9 to 18 volts, which allows for flexibility depending on the available power supply. The current rating of 100 mA is sufficient for driving the LED while also providing headroom for additional components if necessary. The inclusion of the 51 Ohm resistor (R3) is essential for limiting the current flowing through the LED, protecting it from potential overcurrent conditions that could lead to failure.
The use of the 1N4001 diode (D1) ensures that the circuit is safeguarded against reverse polarity connections, which can occur if the power supply is connected incorrectly. This feature is particularly important in portable applications where users may frequently connect and disconnect the power supply.
Electrolytic capacitors C1 and C2 are used to filter any voltage spikes or noise from the power supply, ensuring that the voltage regulator operates smoothly. This filtering is critical for maintaining the stability of the output voltage, which directly affects the performance of the LED.
Overall, this portable inspection lamp circuit represents a robust solution for workbench lighting, combining simplicity with effective design principles to meet the needs of electronics enthusiasts. The option to enclose the circuit in a plastic bottle cap not only provides a protective housing but also contributes to the portability of the device, making it easy to transport and use in various settings. The optional lens enhances the focus of the light, allowing for better visibility of intricate components during work.A very useful workbench lighting unit for electronics hobbyists. The portable inspection lamp circuit consists of an on-board voltage regulator and a high-bright 5mm white LED. Any 9 to 18 volt dc rated ac mains adaptor, capable to source about 100 mA of output current can be used to power this portable inspection lamp.
After construction the led workbench light circuit should be enclosed in a suitable plastic bottle cap as illustrated here. The miniature lens shown is an optional component. In the prototype, plastic made lens lifted from a discarded torch was used! The adjustable 3-pin voltage regulator IC1 (LM317L) in TO-92 pack, is here tuned to supply an output of near 4.
5 volt dc. This supply is directly fed to the white LED (D2) through the current limiter resistor R3 (51 Ohm). Diode D1 (1N4001) works as an input polarity protection guard and two small electrolytic capacitors (C1 and C2) connected at the input and output pins of IC1 improves the overall stability of the regulator circuit. Use a standard RCA or EP socket as the input terminal J1.
LEDs Design Ideas
This slideshow is based on the LED Design Ideas Collection, which features a compilation of LED-related circuits and design applications submitted by readers and published in EDN's Design Ideas section. Users can browse through the circuit schematics in this collection...
Colour Shifting LED`s
These circuits provide a means of altering the YELLOW output of RED / GREEN type two colour light emitting diodes. These circuits use the LM555 timer chip.
The circuit described utilizes the LM555 timer integrated circuit (IC) to modulate the output...
LED stepdown power supply
Below is a proof of concept circuit which needs improvement. The part values shown will run a high efficiency red LED with a Vf of 1.9V from only 2 nicads, right down to 2 volts. For a white LED you...
LED pulse width modulator
Early in the exploration of high-power LEDs, such as the Luxeon 1 and 3-watt devices, the potential of Pulse Width Modulation (PWM) techniques for LED modulation was considered. This method theoretically minimizes distortion by making the LED's "Current versus Luminous...
LM567CM Integrated Circuits
LM5576MHX absolute maximum ratings: (1) VIN to GND: 76V; (2) BST to GND: 90V; (3) PRE to GND: 76V; (4) SW to GND (Steady State): -1.5V; (5) BST to VCC: 76V; (6) SD, VCC to GND: 14V; (7) BST to...
20 & 30 Segment LED Voltmeters
The circuit can be easily configured for full-scale voltages of either 20 or 200 volts by utilizing a suitable potentiometer on the input. It is critical not to exceed 30 volts at pin 5 of the LM3914. A 20 kΩ...
5v 1a power supply using lm2575
A power transistor with a voltage drop of 4 volts and a current of 3 amps may dissipate approximately 12 watts of heat, presenting a challenge in series regulators. In contrast, a saturated transistor or MOSFET with a voltage drop...
LED VU Meter with LM3914N
The circuit utilizes an LM3914N bar graph display driver (IC1) to control up to ten LEDs. It is configured such that when 0V is applied to the input, only the first LED indicator lights up. This straightforward peak reading VU...
28 LED Clock schematic
In the circuit below, 60 individual LEDs are used to indicate the minutes of a clock and 12 LEDs indicate hours. The power supply and time base circuitry is the same as described in the 28 LED clock circuit above....