MIDI Drum Machine Schematic MIDI Interface
#MIDI
#drum machine
#audio interface
#music
#synthesizer
#electronic music
#sound generation
#digital audio
#sequencer
No description available.
MIDI Drum Machine Schematic Main CPU Section
The 82C55 and seven-segment decoders on the display board will be replaced with a set of shift registers to eliminate the need for the 82C55 and the extensive wiring. The ADC0804 will be substituted with a serial interface ADC chip,...
Switch and Controller MIDI Pedal
The sustain pedal, also known as the damper pedal, sends a controller value of CC64 when operated. Pressing the pedal results in an output value of 127, while releasing it results in an output value of 0. Tone generators that...
MIDI Drum Machine Project
The MIDI Drum Machine began in the Fall of 1991 as a project for a microprocessor system design course, shortly after I wrote PAULMON1, the 8051 monitor/debugger. A friend, Rod Seely, both a musician and electronics hobbyist suggested I design...
16 step sequencer schematic
After extensive searching online, a 16-step sequencer schematic was not found that did not require an Arduino, PIC, or another digital controller. A simple 3-chip analog 16-step sequencer with variable speed and arpeggio has been developed, drawing from various inspirations...
Huffman-coded Audio
This project utilizes a magnetic reed switch, a NerdKit, and a set of computer speakers to startle unsuspecting visitors at the door. In constructing this project, various engineering concepts are explored, including digital audio, data compression using Huffman codes, and...
sb2 midi
Instructions for constructing a MIDI interface that connects a Sound Blaster (SB), Sound Blaster Pro (SB Pro), or Sound Blaster 16 (SB16) sound card joystick port to a MIDI-capable musical instrument.
To build a MIDI interface for connecting a Sound Blaster...
MIDI Tester Schematic diagram
MIDI data is transmitted between instruments using a current loop, and an opto-isolator (6N139) is employed to convert this current loop into TTL pulses.
The circuit utilizes the 6N139 opto-isolator to separate the MIDI signal from the receiving device, ensuring that...
Simple MIDI interface tester
Sometimes when experimenting with different soundcards and MIDI interfaces it is useful to see if there is some data going in MIDI interface. This can be easily tested with this adapter, which converts the midi signals to visible light pulses....
Final Project
The objective was to create an octave that could be played by pressing a crocodile paddle. This device was designed as an entertainment tool, functioning as a giant piano, allowing users to control sound with their feet. The project was...