DC-10Mhz Amplifier for Oscilloscope
#oscilloscope
#amplifier
#DC-10MHz
#op-amp
#FET
#attenuator
#frequency response
#voltage range
#Elantec
Description: The DC-10 MHz amplifier shown below is identical for both scope channels. The input FET should be mounted directly on the adjustable attenuator switch for best frequency response. The vertical position pots, R27 and R51, change the dc level of the traces, but do not affect the ac signal. There is no fine (variable) gain adjustment in this circuit. The output voltage ranges from 0 to minus 15 volts. Modern op-amps from Elantec, Harris, or Analog Devices should be considered as a design alternative for the oscilloscope input amplifier shown on this page.
The described circuit is a dual-channel DC-10 MHz amplifier designed for use in an oscilloscope, providing a high-frequency response suitable for a variety of signal measurements. Each channel is identical, ensuring consistent performance across both inputs.
The key component of the amplifier is a field-effect transistor (FET) that serves as the input stage. For optimal frequency response, it is crucial that the FET is mounted directly on the adjustable attenuator switch. This arrangement minimizes parasitic capacitance and inductance that could degrade the signal quality, allowing for a more accurate amplification of high-frequency signals.
The vertical position pots, designated as R27 and R51, are utilized to adjust the DC level of the output traces on the oscilloscope display. These potentiometers do not influence the AC signal, ensuring that the amplification characteristics remain stable while allowing for visual adjustments of the waveform position on the screen.
It is important to note that this circuit does not incorporate a fine gain adjustment feature. The design is focused on providing a straightforward amplification process without the complexity of variable gain control, which can be beneficial in applications where simplicity and reliability are paramount.
The output voltage of the amplifier ranges from 0 to -15 volts, which is suitable for interfacing with standard oscilloscope inputs. This range provides ample headroom for various signal types while ensuring that the output remains within safe operating limits for connected devices.
For modern implementations of this circuit, it is advisable to consider utilizing contemporary operational amplifiers from reputable manufacturers such as Elantec, Harris, or Analog Devices. These components can offer improved performance characteristics, including higher bandwidth, lower noise figures, and better temperature stability, which can enhance the overall functionality of the oscilloscope input amplifier.The DC-10 MHz amplifier shown below is identical for both scope channels. The input FET should be mounted directly on the adjustable attenuator switch for best frequency response. The vertical position pots, R27 and R51, change the dc level of the traces, but do not affect the ac signal.
There is no fine (variable) gain adjustment in this circuit. The output voltage ranges from 0 to minus 15 volts. Modern op-amps from Elantec, Harris, or Analog Devices should be considered as a design alternative for the oscilloscope input amplifier shown on this page.
The described circuit is a dual-channel DC-10 MHz amplifier designed for use in an oscilloscope, providing a high-frequency response suitable for a variety of signal measurements. Each channel is identical, ensuring consistent performance across both inputs.
The key component of the amplifier is a field-effect transistor (FET) that serves as the input stage. For optimal frequency response, it is crucial that the FET is mounted directly on the adjustable attenuator switch. This arrangement minimizes parasitic capacitance and inductance that could degrade the signal quality, allowing for a more accurate amplification of high-frequency signals.
The vertical position pots, designated as R27 and R51, are utilized to adjust the DC level of the output traces on the oscilloscope display. These potentiometers do not influence the AC signal, ensuring that the amplification characteristics remain stable while allowing for visual adjustments of the waveform position on the screen.
It is important to note that this circuit does not incorporate a fine gain adjustment feature. The design is focused on providing a straightforward amplification process without the complexity of variable gain control, which can be beneficial in applications where simplicity and reliability are paramount.
The output voltage of the amplifier ranges from 0 to -15 volts, which is suitable for interfacing with standard oscilloscope inputs. This range provides ample headroom for various signal types while ensuring that the output remains within safe operating limits for connected devices.
For modern implementations of this circuit, it is advisable to consider utilizing contemporary operational amplifiers from reputable manufacturers such as Elantec, Harris, or Analog Devices. These components can offer improved performance characteristics, including higher bandwidth, lower noise figures, and better temperature stability, which can enhance the overall functionality of the oscilloscope input amplifier.The DC-10 MHz amplifier shown below is identical for both scope channels. The input FET should be mounted directly on the adjustable attenuator switch for best frequency response. The vertical position pots, R27 and R51, change the dc level of the traces, but do not affect the ac signal.
There is no fine (variable) gain adjustment in this circuit. The output voltage ranges from 0 to minus 15 volts. Modern op-amps from Elantec, Harris, or Analog Devices should be considered as a design alternative for the oscilloscope input amplifier shown on this page.
Basic-track-and-hold-sample-and-hold
Feedback operates similarly to a conventional operational amplifier (op-amp) voltage follower, providing 11 unity-gain, non-inverting outputs. This configuration also features a very high input impedance. The primary distinction between a track-and-hold and a sample-and-hold lies in the duration for which...
FETVM-FET Voltmeter
This is a circuit of a FETVM (Field Effect Transistor Voltmeter). The function of the VTVM (Vacuum Tube Voltmeter) is replaced by the FETVM while eliminating the conventional line cord instrument.
The FETVM circuit employs field effect transistors (FETs) to measure...
Classic-op-amp-astable-multivibrator
This circuit utilizes the CA3130 BiMOS operational amplifier, which operates at a frequency of 1 kHz. It features a rail-to-rail output swing, ensuring that the output can reach the supply voltage levels. The frequency of operation remains independent of supply...
Mini Oscilloscope schematic
Probably the best advantage is its very small size and the fact that it can run off the power supply of the circuit being tested. Although it has a low frequency range, it can still be used for most circuits....
Refrigerator Pig
Upon opening your fridge door the photocell is exposed to light and the piggy oinks. Reverse engineered circuit diagram is of an early commercial design which uses an OP-AMP to make simulated pig sounds. Modern Fridge Pigs sound much better...
FET biasing
Unlike BJTs, thermal runaway does not occur with FETs. However, the significant differences in maximum and minimum transfer characteristics make ID levels unpredictable with a simple fixed-gate bias voltage. To achieve reasonable limits on quiescent drain currents (ID) and drain-source...
amplifier timer circuit schematic
This circuit deactivates an amplifier or any connected device when a low-level audio signal at its input is absent for at least 15 minutes. By pressing P1, the device is powered on, supplying power to any appliance connected to SK1....
Spike Detector For Oscilloscopes
Dynamic flip-flops ignore pulses at their inputs that are shorter than 40 ns or do not have TTL levels. This means that TTL flip-flops are not well-suited for capturing noise pulses with unknown durations and magnitudes. This issue is commonly...
op amp Crystal Oscillator with OP AMP or Oscillator circuit built with Crystal and Op Amp
Create an oscillator circuit using an operational amplifier and a 7.68 MHz crystal. The design should be similar to the schematic provided below, but specifically tailored for a 7.68 MHz crystal. The available components include the crystal, various capacitors, resistors,...