2x50 watt stereo amplifier
#stereo amplifier
#audio power amplifier
#class H
#STK415-090-E
#high efficiency
#50 watt
#audio signal
#power supply switching
#4-8 ohms
Description: This electronic project stereo amp is based on the STK415-090-E class H audio power amplifier hybrid IC that features a built-in power supply switching circuit. This STK415-090-E class H audio power amplifier provides high efficiency audio power amplification by controlling (switching) the supply voltage supplied to the power devices according to the detected level of the input audio signal. STK415-090-E class H audio power amplifier is pin to pin compatible with STK416-100 stereo amp. This electronic project stereo amp will provide an 50 + 50 watts output power with 0.8 % THD, but it can provide more power, up to 80 watts with 10% THD. STK415-090-E class H audio power amplifier supports output loads from 4 up to 8 ohms and require an input DC voltage from 27 up to 60 volts. For 8 ohms load, voltage required by this stereo amp project are: +/- 27V for VL and +/-37V for VH. This 2x50 watt stereo amp project must be designed so that (|VH|-|VL|) is always less than 40V when switching the power supply with the load connected. Set up the VL power supply with an offset voltage at power supply switching (VL-VO) of about 8V as an initial target. To prevent over heating damage thermal design must be implemented and a thermoplastic adhesive resin must be used for this hybrid IC. A value of 2.34.C/W, satisfies all required thermal resistance of the heat sink. Electronic parts required for this 2x50 watt stereo amp electronic project are: R01, R02 1.5k; R03, R04 100 /1W, R05, R06 56k; R08, R09 4.7 /1W; R11, R12 4.7, R14,R15 560; R18, R19 56k; R21, R22 1k; R24, R26 0.22 10%, 5W; C01, C02 100.F/100V; C03, C04 100.F/50V; C05, C06 100.F/100V; C07, C08 3pF; C10, C11 0.1.F; C13, C14 22.F/10V; C16, C17 2.2.F/50V; C19, C20 470pF; C22, C23 100pF; D01, D02 15V; D03, D04 3A/60V; L01, L02 3.H.
The STK415-090-E class H audio power amplifier operates efficiently by modulating the supply voltage to the output stage based on the input audio signal level. This characteristic allows the amplifier to achieve high output power while minimizing power dissipation, which is critical for maintaining performance and reliability. The design must ensure that the voltage difference between the high voltage (VH) and low voltage (VL) supplies does not exceed 40V to prevent damage during operation.
The thermal management of the amplifier is crucial, as excessive heat can lead to component failure. A heat sink with a thermal resistance of 2.34 °C/W is recommended to ensure that the hybrid IC operates within safe temperature limits. The use of a thermoplastic adhesive resin for mounting the IC to the heat sink enhances thermal conductivity and stability.
The circuit requires careful selection of passive components to achieve the desired performance. Resistors are specified for biasing and feedback, while capacitors are utilized for filtering and stability. The power supply design must accommodate the specified input voltage range of 27 to 60 volts, with particular attention to the offset voltage for the VL supply. This ensures that the amplifier operates efficiently and within its specified limits.
Overall, the project involves a detailed understanding of audio amplification principles, component selection, and thermal management strategies to create a reliable and high-performance stereo amplifier.This electronic project stereo amp is based on the STK415-090-E class H audio power amplifier hybrid IC that features a built-in power supply switching circuit. This STK415-090-E class H audio power amplifier provides high efficiency audio power amplification by controlling (switching) the supply voltage supplied to the power devices according to the detected level of the input audio signal.
STK415-090-E class H audio power amplifier is pin to pin compatible with STK416-100 stereo amp. This electronic project stereo amp will provide an 50 + 50 watts output power with 0.8 % THD , but it can provide more power , up to 80 watts with 10% THD. STK415-090-E class H audio power amplifier supports output loads from 4 up to 8 ohms and require an input DC voltage from 27 up to 60 volts.
For 8 ohms load , voltage required by this stereo amp project are : +/- 27V for VL and +/-37V for VH . This 2x50 watt stereo amp project must be designed so that (|VH|-|VL|) is always less than 40V when switching the power supply with the load connected.
Set up the VL power supply with an offset voltage at power supply switching (VL-VO) of about 8V as an initial target. To prevent over heating damage thermal design must be implemented and a thermoplastic adhesive resin must be used for this hybrid IC .
A value of 2.34.C/W, satisfies all required thermal resistance of the heat sink . Electronic parts required for this 2x50 watt stereo amp electronic project are : R01, R02 1.5k ; R03, R04 100 /1W , R05, R06 56k ; R08, R09 4.7 /1W ; R11, R12 4.7, R14,R15 560 ; R18, R19 56k ; R21, R22 1k ; R24, R26 0.22 10%, 5W ; C01, C02 100.F/100V ; C03, C04 100.F/50V ; C05, C06 100.F/ 100V ; C07, C08 3pF; C10, C11 0.1.F; C13, C14 22.F/10V ; C16, C17 2.2.F/50V ; C19, C20 470pF ; C22, C23 100pF ; D01, D02 15V ; D03, D04 3A/60V ; L01, L02 3.H .
The STK415-090-E class H audio power amplifier operates efficiently by modulating the supply voltage to the output stage based on the input audio signal level. This characteristic allows the amplifier to achieve high output power while minimizing power dissipation, which is critical for maintaining performance and reliability. The design must ensure that the voltage difference between the high voltage (VH) and low voltage (VL) supplies does not exceed 40V to prevent damage during operation.
The thermal management of the amplifier is crucial, as excessive heat can lead to component failure. A heat sink with a thermal resistance of 2.34 °C/W is recommended to ensure that the hybrid IC operates within safe temperature limits. The use of a thermoplastic adhesive resin for mounting the IC to the heat sink enhances thermal conductivity and stability.
The circuit requires careful selection of passive components to achieve the desired performance. Resistors are specified for biasing and feedback, while capacitors are utilized for filtering and stability. The power supply design must accommodate the specified input voltage range of 27 to 60 volts, with particular attention to the offset voltage for the VL supply. This ensures that the amplifier operates efficiently and within its specified limits.
Overall, the project involves a detailed understanding of audio amplification principles, component selection, and thermal management strategies to create a reliable and high-performance stereo amplifier.This electronic project stereo amp is based on the STK415-090-E class H audio power amplifier hybrid IC that features a built-in power supply switching circuit. This STK415-090-E class H audio power amplifier provides high efficiency audio power amplification by controlling (switching) the supply voltage supplied to the power devices according to the detected level of the input audio signal.
STK415-090-E class H audio power amplifier is pin to pin compatible with STK416-100 stereo amp. This electronic project stereo amp will provide an 50 + 50 watts output power with 0.8 % THD , but it can provide more power , up to 80 watts with 10% THD. STK415-090-E class H audio power amplifier supports output loads from 4 up to 8 ohms and require an input DC voltage from 27 up to 60 volts.
For 8 ohms load , voltage required by this stereo amp project are : +/- 27V for VL and +/-37V for VH . This 2x50 watt stereo amp project must be designed so that (|VH|-|VL|) is always less than 40V when switching the power supply with the load connected.
Set up the VL power supply with an offset voltage at power supply switching (VL-VO) of about 8V as an initial target. To prevent over heating damage thermal design must be implemented and a thermoplastic adhesive resin must be used for this hybrid IC .
A value of 2.34.C/W, satisfies all required thermal resistance of the heat sink . Electronic parts required for this 2x50 watt stereo amp electronic project are : R01, R02 1.5k ; R03, R04 100 /1W , R05, R06 56k ; R08, R09 4.7 /1W ; R11, R12 4.7, R14,R15 560 ; R18, R19 56k ; R21, R22 1k ; R24, R26 0.22 10%, 5W ; C01, C02 100.F/100V ; C03, C04 100.F/50V ; C05, C06 100.F/ 100V ; C07, C08 3pF; C10, C11 0.1.F; C13, C14 22.F/10V ; C16, C17 2.2.F/50V ; C19, C20 470pF ; C22, C23 100pF ; D01, D02 15V ; D03, D04 3A/60V ; L01, L02 3.H .
Schematic 2.1 Channel Systems-Dual Power Amplifier TDA7240 and TDA1517Circuits
The primary issue with the design of a stereo amplifier that includes a total bass driver is that the signals from the left and right channels eventually become combined. This summation process minimizes the separation between channels, compromising the fundamental...
Audio Signal Strength Detector/Converter
Below is the schematic diagram of an audio input module. This module is capable of producing a DC output voltage that is proportional to the amplitude of the input signal.
The audio input module typically consists of several key components that...
2x22W Stereo Car Audio Amplifier with TDA1553CQ
This is a stereo audio amplifier designed for automotive applications. The circuit utilizes a single integrated circuit, the TDA1553, along with several external components. This IC is responsible for managing the stereo audio system in a vehicle. The TDA1553CQ is...
Audio Stereo Amplifer
This setup has a disorganized arrangement of wires, prompting the decision to remove both components from their respective housings and place them in a custom-built enclosure. While undertaking this task, additional features such as a VU meter and volume control...
Dual Input-Combining Stereo Line Amplifier
This circuit combines two separate line-level stereo (L & R) signals into one stereo (L & R) output, eliminating the need to switch between two pairs of input signals. It is utilized in a scenario where the stereo audio from...
Magnetic-phono-preamplifier
This simple stereo amplifier utilizes a National LM3871C. The pin numbers in parentheses correspond to one channel, while those without parentheses refer to the other channel. The supply voltage can range from +9 to +30 Vdc at approximately 10 mA....
22 Watt Stereo Amplifier
This circuit is very basic to build and puts out great power for your car or home. Keep all leads as short as possible.
The described circuit is a fundamental power amplifier, suitable for applications in automotive or residential settings. The...
Stereo car audio amplifier TDA1557Q TDA1553Q
This stereo amplifier is designed for automotive applications and can deliver up to 2 x 22W using a single TDA1557Q or TDA1553Q from Philips.
The stereo amplifier circuit utilizes the TDA1557Q or TDA1553Q integrated circuit, which is a high-performance audio...
Audio signal control circuit
Audio signal control circuit. It illustrates a typical audio signal control circuit where two audio signals enter the integrated circuit through switching and tone controls (treble and bass), subsequently adjusting the output sent to the audio power amplifier.
The audio signal...